Bird House 001 - No multi-color printer required
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A bird house for birds that are homeless
- Ocena
- 0 / 5
- Polubienia
- 30
- Pobrania
- 94
- Wydruki
- 0
- Wyświetlenia
- 363
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
It's a bird house! You know... for the birds! ... Because they're homeless!
This beautiful bird house does not require a multi-color printer and features a bottom that unscrews for needed cleaning.
If placing this outdoors, make sure you print using filament that is durable in the heat.
Printing Instructions: The 3mf provided was created using Bambu Studio and should already have the following settings applied. All models should already be oriented in the way they are intended to be printed.
Supports: None
Layer height: 0.2mm
Assembly Instructions: Refer to the provided assembly guide for assembly
Thank you for your time and consideration on this matter.
For those who have joined my club at the “Obsessor” tier or have subscribed to my commercial membership on Patreon, prints of this model can be used for commercial purposes.
Feel free to join my discord for additional support, questions, or suggestions!
Filament used:
Polymaker White PLA Pro
Polymaker Galaxy Red (Hedgehog Makes)
Polymaker Matte Charcoal Black PLA
Polymaker Silver Metalic PLA
Polymaker Brown PLA Pro