[YAY_K1_Max] Yes, another yet Creality K1 Max X-axis rail conversation (WIP)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Instead of round guides, the mgn12h rail is used and reinforced with a 10x1 square aluminum tube
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 38
- Wydruki
- 0
- Wyświetlenia
- 507
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
---Early WIP preview for testing---
Tested only on K1 Max with CHC Pro hotend and KKm feeder!
There are strange and incomprehensible solutions, perhaps they will be changed in the future :)
The recommended print orientation is attached to the project, don't forget to add support for motor mounts.
After assembly, parking sensitivity and X and Y movement limits must be adjusted. If incorrectly adjusted, carriage X may touch the pulleys.
If the input shaper test on X shows a high peak in the 120 Hz region, try limiting the test to 5-90 Hz at 60-75 aph (with belts tension at 110-130 Hz).
BOM:
Coupling D20L26 - 2 pcs. https://ali.click/883341l
Pulleys for belt 10-15 mm - 2 pcs. https://ali.click/wc3341e
Plunger set screw m6x10 - 4 pcs. https://ali.click/yy4341x
Pin 5x60 - 2 pcs.
Bearing MF95zz - 4 pcs.
Rails MGN12H 400 mm (for K1 Max)
Aluminum square tube 10x1 406 mm
Erickson m3x8 nut with a flat head - 11-18 pcs.
m3x10 cylindrical head screw - 7-14 pcs.
m3x30 cylindrical head screw - 2 pcs.
m3x20 cylindrical head screw - 2 pcs.
Bearings F623zz - 24 pcs.
Washers 3x6x0.5 - 24 pcs.
Washers 3x6x2.0 - 2 pcs.
Washers 3x6x0.1 - 4 pcs.
Without counting the m3x5x4.5 heatset (length 4-5, diameter 4.5-5, it is better to have a stock of different ones)
Some other m3 screws of different lengths with a cylindrical head