[YAY_K1_Max] Yes, another yet Creality K1 Max X-axis rail conversation (WIP)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Instead of round guides, the mgn12h rail is used and reinforced with a 10x1 square aluminum tube
- Rating
- 0 / 5
- Likes
- 8
- Downloads
- 38
- Makes
- 0
- Views
- 507
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Creality Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
---Early WIP preview for testing---
Tested only on K1 Max with CHC Pro hotend and KKm feeder!
There are strange and incomprehensible solutions, perhaps they will be changed in the future :)
The recommended print orientation is attached to the project, don't forget to add support for motor mounts.
After assembly, parking sensitivity and X and Y movement limits must be adjusted. If incorrectly adjusted, carriage X may touch the pulleys.
If the input shaper test on X shows a high peak in the 120 Hz region, try limiting the test to 5-90 Hz at 60-75 aph (with belts tension at 110-130 Hz).
BOM:
Coupling D20L26 - 2 pcs. https://ali.click/883341l
Pulleys for belt 10-15 mm - 2 pcs. https://ali.click/wc3341e
Plunger set screw m6x10 - 4 pcs. https://ali.click/yy4341x
Pin 5x60 - 2 pcs.
Bearing MF95zz - 4 pcs.
Rails MGN12H 400 mm (for K1 Max)
Aluminum square tube 10x1 406 mm
Erickson m3x8 nut with a flat head - 11-18 pcs.
m3x10 cylindrical head screw - 7-14 pcs.
m3x30 cylindrical head screw - 2 pcs.
m3x20 cylindrical head screw - 2 pcs.
Bearings F623zz - 24 pcs.
Washers 3x6x0.5 - 24 pcs.
Washers 3x6x2.0 - 2 pcs.
Washers 3x6x0.1 - 4 pcs.
Without counting the m3x5x4.5 heatset (length 4-5, diameter 4.5-5, it is better to have a stock of different ones)
Some other m3 screws of different lengths with a cylindrical head