1 / 3
Scope Throw Lever 42mm - Perfect Fit for DDoptics Nighteagle V6 Gen3 — zdjęcie 1
1 / 3

Scope Throw Lever 42mm - Perfect Fit for DDoptics Nighteagle V6 Gen3

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Scope Throw Lever with a 42mm inner diameter

Ocena
0 / 5
Polubienia
1
Pobrania
29
Wydruki
0
Wyświetlenia
91
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Other Sports
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Scope Throw Lever with a 42mm inner diameter.

Loosely inspired from https://www.printables.com/model/507645-clamp-on-throw-lever-for-athlon-btr-gn2-scope but these don't fit my scope, so I completely design it by my own.

The knurling and recess are designed to fit a DDoptics Nighteagle V6 Gen3.
While it fits perfect on this scope, it should also fit other rifle scopes with the same diameter.

Hardware needed:
1x M3x16 Bolt ISO7380-1 or ISO4762
1x M3 Nut ISO4032

The nut cover is not strictly necessary, but for aesthetic purposes. Secure it in place with superglue.

Printed in PETG with support for the Boldhead-Hole.

I'd appreciate a "Like" and a "Make" if you like the throw lever.

Tagi