Liczymy pasujące modele…
Christmas 2022 Update I changed the corners of the picatinnies to radii so they would print better. Also I adjusted the angle of the infill in order to get ultra smooth glide surfaces for the slider. Have fun! Watch the Beer Bottle Gun in…
Wydruk około 0,88 €–1,08 € nettoWstępna wycena jednego wariantu
Easy flamethrower for lighter and a antiperspirant You can use rubber bands to keep the lighter awake Be carefull, its still just plastic material!! Its really dangerous to play with fire, do it only under the supervision of a…
Wydruk około 2,65 €–3,24 € nettoWstępna wycena jednego wariantu
Fold-out Couch/Sleeper Sofa with Decorative Throw Pillows Included are the following STL files for 3D printing: Couch Couch Right Cushion Couch Left Cushion Couch Small Throw Pillow Couch Large Throw Pillow 3D PRINTING SETTINGS Layer…
Zoom throw lever for Vortex Diamondback Tactical 6-24x50 FFP Probably works with some other Vortex scopes. I redesigned a bit the zoom throw lever by NJ_v_N. Added 3mm threaded insert, elongated the lever. Print Settings Printer: Printo3D…
As mentioned before, this a flamethrower model for the Dummy 13 action figure. For a while, I have been looking for a flamethrower model for my wide collection of Dummy 13s, and have had no success. I decided to model one myself and put…
this file is a ready to slice model. print with PLA or ABS. this is in beta stage. if you want to use paracord for the grip you will have to do it comment if you want me to show how.
This is a remix of @JahnRoux Throw Lever, redesigned for the Vortex Strike Eagle 1-8x24. It's adjusted in inner diameter and grove count to provide a perfect fit for the magnification ring. Fits like a glove, perfect snug fit! Same…
Remixed the vortex throw lever from @BigFootPL_269198 to work on Vortex Viper 44mm scopes, with the original from NJ_v_N on thingiverse. It is sized at 44.5mm and fits tight when fully made up, but you will need to trim any flashing from…
Like my previously uploaded Proton Pack Parts I created these models to avoid buying expensive and rare movie prop replica parts for my Proton Pack Particle Thrower. This thing includes nearly all the odds and ends you need to create a…
When you have a dog that loves playing ball, a thrower helps save your shoulder and keeps you from handling drooly gross tennis balls. But carrying a 2 foot long thrower can be awkward. So I designed a collapsing thrower, so that it's…
This is a set of handles for the two throwing knives listed below. Note that the black knives require a different handle from the silver ones. The reason I made these is because the parachord-wrapped handles can be easily damaged and the…
This is a model of the Throwing Knives from The Finals. More info, documentation, and source files can be found on Gitlab .
Four great Shurikens
I stopped uploading and updating my models here at Printables! My actual models can be found on my MakerWorld profile – with print profiles. Take care to use the newest models … Throw your soft darts like a ninja! Just insert 8 soft darts…
This in another reel to carry the throwing line. The dimensions are designed for 100 meters of 2mm line (Dyneema, Mastrant,…). You can use this line to pull up climbing rope or antena up the tree. Use the tent stake (or another stick up…
A simple throwing knife and sheath design, originally designed for cosplayers and Ren Faires. Can be used to chunk at people you don't like. Incudes several variations of the knife and sheath. Didn't like any of the other ones out there…
I hope you find this fun and/or useful!
just a maker coin/ ninja star/ torture test/ pls, like I'm desperate should print well without supports (no duh) that's literally it
Throwing Helicopter, a 3D version of the paper model we used to make as kids. The bottom weight folds into the stem to balance it. Ironing may me required on some printers. if you live in a high-rise this is for you!
This is a Simple dice thrower for any board game which need dice thrower
Źródło oznaczyło ten model jako treść 18+.
This is a CUSTOMIZABLE 4-stroke flat-twin (boxer) engine teaching model. It is built from a short TrueGeometry Playground recipe, so you can change the scale (S) and the radial clearance (CLEAR, in mm) and rebuild it in a minute. Each…
Body clamp and mount for lighter to mount onto fire extinguisher if your building a flame thrower. Uses TBTeek torch from Amazon (cheapest one i could get). Lighter slots into the print so it doesn't rotate and you use 2 hose clamps to…
This is an adjustable thickness spacer for the Bolt Long Throw Double Locking Gate Lock Garage Rim Lock type latch readerly available on eBay and the like. it fits my lock and will likely fit all the others, they aren't made to any great…
This is a wireless remote cover the champion whirlybird skeet thrower. The cover is mainly to give the remote a lanyard hole so the remote can hang from your neck or belt. Printed with TPU using 5% infill for softness.
Print with 20 walls, 0 top and bottom layers and 0 infill Check out the video here:
This model is for a throw flasher holder for spear fishing. Internal diameter 20.5mm, sized to fit standard 20mm PVC tube with vinyl wrap. Designed to fit 50mm wide, 4mm thick dive belts.
Replacement lid for Lee Powder throw. Just sits on top like the original. Slight resistance on a well calibrated printer. Adjust the scaling up or down if you have issues with your printer.
Updated 01.25.26: Increased tolerances to accommodate different materials. This is an 8 point shuriken ninja throwing start that allows you to add a US quarter in the center for weight. The cap can be removed using tabs to retrieve the…
Simple 4 point shuriken throwing star. I also have a weighted 8 point version that uses a US quarter for weight: https://www.printables.com/model/1482626-weighted-8-point-shuriken-ninja-throwing-star-with Simple, quick, easy print with PLA.
Saw that no one had a throw lever mount that didn't use a screw, so I did. Uses a 5mm wide ziptie or smaller.
Tool caddy to hang on the edge of a splash pan. Works with Shimp-VL wheels or any 19" splash pans. Dividers are removable and work well if you use 2. One compartment for a rib, and the other 2 for thinner tools such as a needle. Side…
This bat system should work with any wheel where bat pins are spaced 10" apart! Will print with most standard FDM print beds (250 mm x 250 mm / 10" x 10"). Use Notes: Assemble by sliding component A and B onto the dovetail on component C.…
You will need an M3 screw (7mm) and an M3 nut. You need to set a pause in the slicer to insert the nut during printing.
It's a precision tool for RC enthusiasts designed to safely and easily leverage the built-in smartphone levels for accurate control-surface setup on remote control planes and other RC models available in three versions version 1 (Large…
the knife is easy to use and it prints fast the highest distance where i was able to hit the target was about 5 meters
it is easy to throw and prints very fast my kobra 3 did it in about 5 minutes
I created this model for my cosplay of Altair from the game Assassin's Creed. print parameters: PET-G material, infill 25%, perimeters 5
I had to move my carpet and had to create a new throwing line. This is the result. material : PETG infill: 15% support: yes
this throwing star is easy to throw and works perfectly
this kunai is easy to throw andprints fast
This model is compatible with the lego system.
WW1 British soldier throwing a grenade. Scaled to toy soldier size. Because of the model's detailed nature, it may also have thin parts. I recommend resin printing it. If you choose to print it with filament, use a smaller nozzle and…
Scope Throw Lever with a 42mm inner diameter. Loosely inspired from https://www.printables.com/model/507645-clamp-on-throw-lever-for-athlon-btr-gn2-scope but these don't fit my scope, so I completely design it by my own. The knurling and…
Body clamp and mount for lighter to mount onto fire extinguisher if your building a flame thrower. Uses TBTeek torch from Amazon (cheapest one i could get). Lighter slots into the print so it doesn't rotate and you use 2 hose clamps to…
Carry your smokes and lighter wherever you go! The Flamethrower conveniently fits in your pocket and makes fumbling for your smokes a thing of the past. It's a perfect accessory for hiking, golfing, snowboarding, concert-going,…
*** PLEASE READ *** I’ve received notice from Printables concerning my helmet designs. I don’t agree with the notice, but have decided to move my helmets to my Patreon Platform. I’ve actually had multiple requests to offer an avenue to…
Features Precision Fit: Sized to cradle the CMC bag securely without snagging the drawstring or reflective trim. Open Front Design: Allows for a "grab-and-go" deployment—simply pull the bag forward and out. Reinforced Mounting: Features a…
Hammer that throws dice when you smack it on the table! 3D printable but needs a 9x35mm compression spring.
I love to throw, and am happy to let others express their joy in throwing as well. If you love Hammer Throw, print this out and display it, or print for someone else who loves to throw.
* ME OFF AND I WILL THROW YOUR IN MY TRUNK, SIGN Category: Signs & Logos
I was annoyed by fiddling with the body screws. That's why I put the battery in the holder, which (thanks to the magnets) finds its way alone when you throw it in the trunk 100x40mm inside / most Shorty Lipo Packs fit / V2 has 88x44mm…
A pack of 3 types of throwing axes. I call the 3 types WoodCutterAxe, BattleAxe, and IcePickAxe.
EN: This is a simple six-pointed shuriken ninja throwing star. Print with three perimeters and higher filling, otherwise it is not stable enough and does not fly well. We have had good experiences with TPU in tough combat use ;-) — I…
Ein Luftweitwurfdüse, zusätzlich wird eine lange M6 Schraube benötigt um sie zu befestigen. Andere Gewindedurchmesser können in der OpenScad Datei ausgewählt werden. Die M6 Variante gibt es in drei Versionen 1. Mit eingedruckter M6 Mutter…
Magnification Throw Lever for Arken EP-5 Scope. This fits any scope with a 47mm mag wheel. Hardware Required. 3mm x .5 x 7mm socket head screw. Printer: MK4S, Filament: Black Prusa.
Parallax Throw Lever for a Arken EP-5 Scope. Will fit any scope with a 42mm parallax wheel. Hardware: Uses a 3mm x .5 x 5mm socket head screw. Printer: MK4S, Filament: Black Prusa.
This is throwing star. this project uses little filament! for people over 5+
Description Mailbox lock is a mailbox lock for temporarily unused mailboxes to prevent the insertion of trash... Print instructions Printed Parts 1x Print in on side in PETG and as Single Object in Prusa Slicer (Multicolor!) Additional…
This is an adjustable thickness spacer for the Bolt Long Throw Double Locking Gate Lock Garage Rim Lock type latch readerly available on eBay and the like. it fits my lock and will likely fit all the others, they aren't made to any great…
I would recommend printing 2 of these and then using super glue to attach the two halves. I will also sometimes wind a strip of leather around the handle to give it a rap or I will tie paracord through the holes in the handle. DISCLAMER:…
STL model is only half, print 2 and adhere together Grab some red ribbon to add on to the look!
Originally created as a test piece for Flexible filaments but we've had fun with this as a throw toy over the years
This is a wireless remote cover the champion whirlybird skeet thrower. The cover is mainly to give the remote a lanyard hole so the remote can hang from your neck or belt. Printed with TPU using 5% infill for softness.
Ace Levy: Who needs a knife in a nuke fight anyway? All you gotta do is push a button, sir. Sargent Zim: The enemy can not push a button... if you disable his hand. Medic! The “knife” that was worn in the leg sheath by the Mobile Infantry…
Throw lever for the focus on a Hikmicro SQ50L 3.0 scope, might also fit others with focus ring size around 69mm You will aslo need a m3 screw and nut I printed this in PETG, but TPU is probably better
This is my printable Throw Lever for the Gen 1 Strike Eagle (specifically the 1-6x). Slip it onto the scope and use an M3x16 bolt/nut, and tighten until snug!
A little gift I made for my FIL. But I figured other “Old School” IU basketball fans would enjoy it as well!
changed the model so my 6x6 magnets fit
If you download the model, please don't forget to leave a like. Thank you! <3 Feel the heat of battle with this low poly geometric 3D print of Charizard, captured mid Flamethrower. The design highlights the fiery intensity and dynamic…
I designed this simple throwing gauge. Initially, I started with an overengineered design but later simplified it. The gauge consists of a single part for all three arms (print x3). The base includes four slots for 20x3mm magnets, useful…
Simple stamps for pottery and other crafts with 2 variants and 3 sizes each Hand made with love sizes 100x65mm, 75x50mm, 54x35mm Hand thrown with love 100x65mm, 75x50mm, 54x35mm i would suggest ironing
Michael jordan free throw line dunk hueforge Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 200x125.77mm in size You may print at higher layer heights below the Min Depth of 0.48mm The Max…
This is a lowpoly remix of the Discus Thrower (Discobolus) sculpture from "Scan The World". The sculpture was originally made by sculptor Myron of Eleutherae dated circa 450 BCE The .gcode file has fairly robust supports because the model…
UPDATE: Some people have had trouble with weak screws, so I've uploaded new files for the screws, made to be printed horizontally for stronger layer lines. Most printers could print the regular screws just fine, but if they seem weak…
This is a throwing dart for paper or cardboard or any other soft target. Increasing infill from 20% to like 30 or 40 recommended so it is heavier. please let me know if you like the design.
Ti22 throwing and survival knife is a really nice and balanced throwing/survival knife (also the 3D printed one is a good practice). I machined my titanium knife, and it turned out really nice and easy to throw. I made a handle cover and…
New parts to compliment the excellent model created by Cameron: Fully Printable Pottery Throwing Gauge I recommend using his improved “Gauge Bolts Stronger STLs” for the bolts All preferred parts designed to be printed in Flex. I used…
Small, lightweight throw lever for the Arken EPL4 4-16 scope. Does not require any hardware - it is a snug friction fit. Depending on what filament you prefer and shrinkage rate, you may have to adjust scale. I printed at 100% scale with…
This is a valentine kung fu throwing star heart (with safety ring). Fun to print and throw around. Easy to print requiring no supports and minimal infill. Best printed in TPU for maximum fun. Make love not war...
Introducing the 66mm outside diameter line throwing round for your can canon. This design is inspired by the US Navy MK 87 line throwing projectile. Print both parts at 100% walls in the upright position with no supports. Feed 550…
