1 / 9
Shower towel / face washer hook for glass wall or extruded edge shower recess — zdjęcie 1
1 / 9

Shower towel / face washer hook for glass wall or extruded edge shower recess

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

There are any number of shower hooks on Thingiverse, so why did I create a new one? This design is for shower recesses…

Ocena
0 / 5
Polubienia
0
Pobrania
56
Wydruki
0
Wyświetlenia
326
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Bathroom
Licencja
Creative Commons — Attribution

There are any number of shower hooks on Thingiverse, so why did I create a new one?

This design is for shower recesses that are either edge-less glass panels or glass with an extruded aluminium top edge. It's fully customizable.

Two nubs hold the hook so it shouldn't fly off when you remove your towel or face washer.

The STL hook models here are to fit 1/4" (6mm) thick glass with a 1/2" (12mm), 1" (25mm) and 2" (50mm) across hook choice. All are 1/8" (3mm) thick and 1/2" (12mm) wide.

The hook is customizable so feel free to make it for other glass (change GLASS_THICKNESS), taller (increase SHOWER_RAIL_HEIGHT), stronger (increase HOOK_THICKNESS) or wider (increase HOOK_WIDTH).

See the customizer parameter symbols diagram for their location.

I made these from white PETG printed at 100% infill for maximum strength and also so there were no internal cavities to trap moisture.

Print Settings

Printer:

ALDI Coocoon Create (rebadged Wanhao)

Rafts:

No

Supports:

No

Infill:

100

Filament: generic PETG

Notes:

Print at 100% infill for maximum strength and exclusion of moisture cavities.

Category: Bathroom

Tagi