Flame thrower
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Body clamp and mount for lighter to fire extinguisher
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 2
- Wydruki
- 0
- Wyświetlenia
- 50
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial
Body clamp and mount for lighter to mount onto fire extinguisher if your building a flame thrower. Uses TBTeek torch from Amazon (cheapest one i could get). Lighter slots into the print so it doesn't rotate and you use 2 hose clamps to clamp it to the extinguisher. Extinguisher is just a emptied Kiddie KD61-5BC from Walmart.
Print at 50% infill and triangle structure, big piece is at a -22% angle and small one is -15% to prevent the print from snapping. I just used pla and have had no problems with it.
Rest of the build is just a tire valve stem with a 1/2 inch hole in the tank for it to be pulled through.