Flame thrower
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Body clamp and mount for lighter to fire extinguisher
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 2
- Makes
- 0
- Views
- 50
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Attribution — Noncommercial
Body clamp and mount for lighter to mount onto fire extinguisher if your building a flame thrower. Uses TBTeek torch from Amazon (cheapest one i could get). Lighter slots into the print so it doesn't rotate and you use 2 hose clamps to clamp it to the extinguisher. Extinguisher is just a emptied Kiddie KD61-5BC from Walmart.
Print at 50% infill and triangle structure, big piece is at a -22% angle and small one is -15% to prevent the print from snapping. I just used pla and have had no problems with it.
Rest of the build is just a tire valve stem with a 1/2 inch hole in the tank for it to be pulled through.