1 / 3
Anycubic Photon Mono 4 TPU anti-slip feet — zdjęcie 1
1 / 3

Anycubic Photon Mono 4 TPU anti-slip feet

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

An anti-slip covers for Anycubics Photon Mono 4 plastic feet.

Ocena
0 / 5
Polubienia
4
Pobrania
13
Wydruki
0
Wyświetlenia
139
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial

Fixing what a factory should've made in the first place. TPU printed feet covers to make your ANYCUBIC Photon Mono 4 a non-slip and steady printer. They are created to be press-fit so no need to use any double tape/glue, you just put them on. 😎🤙


Print with TPU95A
Bottom layers:  8 (or 100% infill) 
Walls:  4 
Layer height don't matter, anything below 0.2 is pointless, i went for 0.26mm with 0.4mm nozzle

You can set seam position to BACK, if standard setting looks bad on your slicer

Tagi