Gridfinity 3/8 Drive Hex Socket Organizer Storage Metric and SAE
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Gridfinity storage for 3/8 drive hex sockets with hinging magnetic holders.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 14
- Wydruki
- 0
- Wyświetlenia
- 103
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Public Domain
An efficient use of gridfinity space holding both a metric and SAE 3/8 drive hex socket set.
Size 6U 2x3 box modified to with 2 hinges that can hold any 3/8 drive sockets.
Each hinge has a hole for a 6x3mm magnet for helping hold the sockets. Magnets are optional.
This box was specifically made to accommodate Pittsburgh Hex Socket set. While it may work for a variety of other sockets, I cannot guarantee fitment for other manufacturers.
ASSEMBLY: No hardware required! (6x3mm magnets optional) Hinges will require a slight bend in the middle in order to snap in place. They will fit either way BUT I have found best results are when the magnet side of the hinges are both facing up.
Recommended printing in PETG. I have confirmed the model works in PLA but I suspect the longevity will be reduced compared to PETG.