Discreet Glass Door (6mm) Towel Hanger
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A sturdy hanger for your towels to hang on the glass wall of your shower cabin - up to 6mm thick
- Ocena
- 5 / 5
- Polubienia
- 1
- Pobrania
- 12
- Wydruki
- 0
- Wyświetlenia
- 67
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bathroom
- Licencja
- Creative Commons — Attribution — Noncommercial
Strong and durable shower hook for your towels. It was made to accomodate up to 6mm thick glass panel.
Optimized to accomodate the best possible functionality for the least amount of space taken/materials used (15mm wide with less than 3 grams of material). Tested both with thin/fluffy + dry/wet shower towels. Easy to put in, easy to remove; towels latch onto the edge and don't fall off.
For printing in clear PET-G please refer to How To Print Glass
My attempt CLEARly didn't work as you can see in the photos, maybe I'll update the instructions as soon as I manage to print it fully transparent;
The only print setting that matters is set count of walls to 4.
Print takes barely 3g of filament;
Printing orientation as shown in the picture below/original to the model.
I highly suggest to print it in PET-G since it's more flexible and surely won't scratch the glass. PLA also worked fine for me but I haven't tested it long-term.
BOBER🦫