MTB barend 19/21 mm (remixed)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Barend for bicycle's handlebar with lengthening for grips
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 2
- Wydruki
- 0
- Wyświetlenia
- 52
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution
For my bicycle's handlebar I remixed this pretty model (I scaled it 90% + add cylinder):
It turned out that my foldable handlebar (560 mm, it really shorter that in kit, from Ali: https://ali.click/ontd41v ),
but It hasn't enough space for the shifters, etc, that's why I tryed to lengthen the place for grips not to overhang with solid cilinder.
Printed with PLA, PETG will be also good. I added tree support at several points, 'cause it came off (without a glue on 1/2 path :))
My handlebar hasn't any threads, so I inserted it with one little pressure after 30 sec-1 min warming METAL with fan (plastic should be cold).
