MTB barend 19/21 mm (remixed)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Barend for bicycle's handlebar with lengthening for grips
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 2
- Makes
- 0
- Views
- 52
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Attribution
For my bicycle's handlebar I remixed this pretty model (I scaled it 90% + add cylinder):
It turned out that my foldable handlebar (560 mm, it really shorter that in kit, from Ali: https://ali.click/ontd41v ),
but It hasn't enough space for the shifters, etc, that's why I tryed to lengthen the place for grips not to overhang with solid cilinder.
Printed with PLA, PETG will be also good. I added tree support at several points, 'cause it came off (without a glue on 1/2 path :))
My handlebar hasn't any threads, so I inserted it with one little pressure after 30 sec-1 min warming METAL with fan (plastic should be cold).
