Prusa Mini spring sheet holder with clamping mechanism
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Wstępna wycena dla PETG
7,47 € – 9,13 € netto (bez VAT)
Dla pliku: steel sheet holder no text_0.2mm_PETG_MINI_8h56m.gcode
To wstępna wycena jednego pliku. Dokładną cenę poznasz przed zamówieniem.
Plik i założenia wyceny
Plik użyty do wyceny
Średnia wycena orientacyjna: 8,30 € netto (środek widełek).
- Masa podana przez autora
- 97 g
- Czas druku podany przez autora
- 8,94 godz.
- Materiał u źródła
- PET
- Materiał wyceny
- PETG
- Drukarka wyceny
- Bambu Lab P1S - 0.4 nozzle
- Proces wyceny
- 0.20mm Standard
Orientacyjna wycena wyłącznie wybranego pliku, oparta na masie i czasie druku podanych przez autora. Warianty plików nie są sumowane. Ostateczna cena zostanie obliczona po analizie pliku.
Zapisane na tym urządzeniu.
I designed this spring sheet holder with small "springs" to keep the sheet upright.
- Ocena
- 0 / 5
- Polubienia
- 16
- Pobrania
- 56
- Wydruki
- 0
- Wyświetlenia
- 462
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Share Alike
I designed this spring sheet hold to eliminate two things that bothered me on the available ones.
First one being the spring sheets not standing upright due to the different thicknesses of smooth, rough and satin sheets.
For that purpose I simply hid some “springs” that clamp on the sheets slightly. (less slightly for the smooth one, since it's twice as thick as the others)
Second thing that bothered me was that I was not being able to properly see which sheet is behind the first one, so I simply raised them by 10mm each.
I printed it out of PETG for the flexibility and because it's softer than PLA.
With PLA I would be worried about the plates getting scratched after a while.
I have been using my PETG version for a couple weeks now and can't see any scratches so I can finally post it with good conscience.