Ozark Trail 7.5" Scales - Thickened!
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Scales for the popular Walmart Ozark Trail 7.5in knife. Remixed and thickened for better fitment.
- Ocena
- 5 / 5
- Polubienia
- 7
- Pobrania
- 51
- Wydruki
- 1
- Wyświetlenia
- 202
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- GNU General Public License v2.0
Intro:
I tried printing @MatthewTimbs scales, but they needed to be a bit thicker for the pivot bolt to clamp properly. Therefore, I took his model and added some thickness!
Files:
OT7.5SCALE_LEFT1.1 - Left Scale
OT7.5SCALE_RIGHT1.1 - Right Scale
Printers and Filaments:
Printed on Prusa CORE ONE with Polymaker Panchroma Dual Matte PLA.
Any PLA or better should be good enough.
Print Instructions:
print flatside down
supports only needed for omega spring cavity
0.1mm layers to reduce layer lines
15% infill worked fine
mirror files if you want reverse clip
Post Printing (OPTIONAL):
Sand with ~120 and ~220 grit sandpaper
Spray paint
Assembly:
Tools needed: T6 and T9 torx bits
Assembly is easiest when replacing one scale at a time. Try to always have one side of the pivot bolt through the knife as re-stacking the bearings can be annoying. Shift the blade, bearings, and scales around while pushing the pivot screw through.
Conclusion:
Have fun. Please share your makes!