Ozark Trail 7.5" Scales - Thickened!
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Scales for the popular Walmart Ozark Trail 7.5in knife. Remixed and thickened for better fitment.
- Rating
- 5 / 5
- Likes
- 7
- Downloads
- 51
- Makes
- 1
- Views
- 202
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- GNU General Public License v2.0
Intro:
I tried printing @MatthewTimbs scales, but they needed to be a bit thicker for the pivot bolt to clamp properly. Therefore, I took his model and added some thickness!
Files:
OT7.5SCALE_LEFT1.1 - Left Scale
OT7.5SCALE_RIGHT1.1 - Right Scale
Printers and Filaments:
Printed on Prusa CORE ONE with Polymaker Panchroma Dual Matte PLA.
Any PLA or better should be good enough.
Print Instructions:
print flatside down
supports only needed for omega spring cavity
0.1mm layers to reduce layer lines
15% infill worked fine
mirror files if you want reverse clip
Post Printing (OPTIONAL):
Sand with ~120 and ~220 grit sandpaper
Spray paint
Assembly:
Tools needed: T6 and T9 torx bits
Assembly is easiest when replacing one scale at a time. Try to always have one side of the pivot bolt through the knife as re-stacking the bearings can be annoying. Shift the blade, bearings, and scales around while pushing the pivot screw through.
Conclusion:
Have fun. Please share your makes!