P
Printables
Drill Dust Collector with Grips
Added some finger tabs to help hold it/keep fingers away from the bit
Search results: grips
Counting matching models…
P
Printables
Harness Grips for Schroth 2" Wide Racing Harnesses
A brim is recommended for adhesion. Designed for printing with PETG. Due to the locking caps, please note that removal from the harness will break the clips off and they will need to be printed again if removed.
P
Printables
Universal thumbstick extension grips (Xbox/Playstation/Nintendo switch)
inspired by SCUF Thumbstick grips and designed to fit controllers for Xbox One, Xbox Series, Playstation 5, and Nintendo Switch Pro Controller (not joycons) No glue is required, but it is recommended Print cap in TPU Support only for…
P
Printables
ROG ALLY Z1 / Z1E Grips
edit: Just added 2 “angle” files which increase the angle back by 7.5 and 10 degrees. I feel this is better than the straight vertical ones I had before but I have left the vertical ones just in case someone else prefers them. I took the…
P
Printables
Gripstrength Game print in place
I primarily designed it as a fun game, but its also a fun large print i havent come to print yet. It should take around 200 to 250 gramms of filament and it fits on a 220x220 mm printbed. I am goin to print with 3 walls, 3 top and bottom…
P
Printables
SMA Connector Grips
Snap on covers that stay friction fitted to most any SMA connector, making them easier to turn. The pictured version is printed in PETG but ABS, PC, and PA all worked acceptably for me. Printed vertically with no supports if oriented…
P
Printables
Controller Grips for MSI Claw 8 AI+
Controller style grips for the Claw. There is a lot of room for improvement but they work for me so im sharing it for everyone. Feel free to improve the design and share it with everyone!
P
Printables
Milescraft TriGrips Holder
Needed a storage unit for my 6 TriGrips. Designed to attach to pegboard, a french cleat or any solid surface.
P
Printables
Parametric TPU Bike Grips (OpenSCAD)
Couldn't find a bike grip I really liked with a cursory search. So here is my version. The grips provided as STL files have the following dimensions: Length: 135mm Inner diameter: 22mm Outer diameter: 30mm Also attached is the OpenSCAD…
P
Printables
Ruger SR1911 Grips
As the title states. Standard settings, full-sized Ruger SR1911 grips with custom diamond/circle pattern. Printed in PLA and worked great. Needed a little sanding on the right-side top (safety switch) as the raised texture blocked it from…
P
Printables
Hecate Full Grips
I hated the internals of the bigshock showing, and this way you don't need to trim the original shell. You can just throw it out :) Needs 2x M3x25 bolts, 1x M3x16 bolts, and 3 M3 hex nuts. Fit is a little tight, so give it a good press.
P
Printables
Beyblade X String launcher Slim Side Grips
A slimmed down version of Beyblade X Side Grip made by Orberlorb
P
Printables
Bike Handle Bar Grips
This is meant to be printed in TPU. Use the default TPU settings for any slicer and it will work just fine, and print one at a time to avoid stringing. The length of the grips is 120mm/3.94in and a diameter of 22mm/0.87in. I have provided…
P
Printables
HEX grips - Ventilated bike grips
Ventilated bike grips Riding your mountainbike becomes a breeze with these HEX grips! I have been using these bike grips for 6 years now on my mountainbike and they are awesome! TPU is a very durable and comfortable material and 3D…
P
Printables
Grinder Grips - the TPU herb shredder helper
As I get older I find it more and more difficult to grip things. This is especially frustrating for medicine containers and grinders. I designed these two variations to fit my particular brand, which is 68.9mm in diameter. You can use the…
P
Printables
Ariens Snow Blower Comfort Grips
These 3D printed attachments improve the handling of the Ariens Compact 22 model by offering a more ergonomic grip, reducing hand and wrist fatigue and injury during long snow clearing. YouTube: https://youtube.com/shorts/RJsWrlRgMPI
P
Printables
Legion Go - Tablet Mode Comfort Grips
I use the Legion Go tablet for note-taking during lectures, but I’ve grown tired of people asking if it’s a Switch 2. These infills solve that problem perfectly Could be printed with fuzzy skin to improve grip, though I haven’t gotten…
P
Printables
Grips for Popular Alcohol Blaster
Use M3 hardware to affix. Recommend thread first to avoid stripping while assembling. Related: https://makerworld.com/en/models/2339433-alcohol-nerf-blaster?from=search#profileId-2557129
P
Printables
Grips for CZ 75 gun
Replacement grips for the CZ 75 Compact airsoft gun. They have a flat front part, so they can be printed without supports. They are held in the gun by a click and can be secured with a screw (M3x25). Printed from PLA. The opposite side…
P
Printables
Rog Ally grips (Xbox like)
Two versions available, v1 is for an upper position of hands and v2 (my favourite) feels more organic handle IMPORTANT: You must need double sided tape to install them I have basis on the work of these two guys to create the grips
P
Printables
Double Stack Protean Grips
Like the Protean style grip but want to run double stack mags? Well here you go. Took the general shape of Flygonial's grip and remodeled it to fit a double stack mag and my hands. Uses the same hardware as the original and works with all…
P
Printables
Horizontal and angled foregrips for right handers and left handers
Angled (22.5 degrees) and horizontal foregrips. Left handed? No problem!
P
Printables
Replacement grips for the Top Ring and Handle of some Starfrit Tongs.
I printed my replacement for the Ring Grip out of PLA and glued it together with CA glue. However, for the Handle Grip, you will definitely need print it using TPU. Be forewarned that it's a bit tricky to slip the replacement grips in…
P
Printables
Fat Grips (Jimmy Grips)
These are called Jimmy Grips, designed to operate like the popularly known Fat Grips. I added my own deep and thick knurling, and is designed to wrap around barbells or dumbells. The purpose of these jimmy grips is they wrap around a…
P
Printables
Rear Joy-Con Shell Ergo Grips
This is a replacement rear shell set for Nintendo Switch Joy-Cons. It adds an ergonomic grip making it much more comfortable to hold the switch in handheld mode. My goal was to design a grip that felt as close to OEM as possible and…
P
Printables
MA 1911 Grips
These are custom grips made for my neighbor. This is a remix of an existing Thingiverse design.
P
Printables
Controller Grips for 8BitDo Micro
Reccomend printing with organic supports at 0.2 layer height with 0.4 nozzle. If you want the same fuzzy skin texture for the grip and the logo on the back like in the picture then try using the .3mf file below, though bare in mind this…
P
Printables
Bed sheet grips
I created some simple TPU finger grips for my spring steel beds. I have quite a few and find these are nice to avoid touching the hot bed sheet, They are also nice to keep greasy fingers off the sheet and add a little customization to…
P
Printables
grips for airsoft or blaster tag
ONLY DOWNLOAD THE ZIP FILE! This is a reupload made by AtomBomb347 on a website called DEFCAD. I don't know how long or how many grams it actually is, I just guessed.
P
Printables
Oxford Heaterz Heated Grips Temp Controller Handlebar Mount
This is an alternate controller mount for the Oxford Heaterz Heated Grips Temp Controller. The included mount did not work well on the KTM Adventure 390 handlebar. This mount should also work on any handlebar with a 22mm diameter. It was…
P
Printables
CRF300L Oxford Heated Grips Controller Mount
Attach your Oxford heated grips controller next to your dashboard using a simple cable tie. 2 Versions: CRF300L - Oxford Heated Grips Mount (original) Ver 1.0 Compatible with the EUR (2021-2024) model CRF300L - Oxford Heated Grips Mount…
P
Printables
Auto-rewind spool holder - Grips & Arm for wheel weights
Arm for wheel weights added. Screw grip added Glue grip added
P
Printables
Anbernic RG35XXSP Grips (Air & Solid)
This is a set of comfort grips for the Anbernic RG35XXSP. Fit to slide and lock onto the SP. Still allows for the lid to close, and access to all buttons and ports This purchase includes both a SOLID and AERATED version. The solid is a…
P
Printables
Rounded Cap for ODI Bike Grips UPDATED
4 OCT 24: Added a 20mm extension with 18mm OD. I'm printing at 0.12mm layers with normal snug supports and PETG for an interface layer.
P
Printables
uGrips - The Mother of all Bike Handles V2
This is a complete set of grips. The parts should be printed in PetG, and the grip itself with TPU (D40 or A80). The grips are comfy and lasting. Feel free to print them for yourself. If you want to sell them, let me know. For leather…
P
Printables
steamdeck stickgrips snap-on
i kept slipping my thumbs on the sticks so i designed something to help i printed mine in .10 with pla on a .4 nozzle fits really snugly on the sticks been using mine for about a week daily for an hour, love them
P
Printables
ASUS ROG Ally Controller Grips and stand
Clip-on Grips / stand for Asus ROG Ally. I found the options available made me reach for the ABXY buttons, leading to hand fatigue pretty quick, so I designed these to mimic other controllers. Truth be told, the Ally is a bit heavier than…
P
Printables
Rush and Crush Grips for Nightingale Magazines
Rush and Crush Grips that support Nightingale mags while still retaining the push button mag release. It might be slightly tight to actuate the magwell initially, but it will work itself soon. if need be scale down the mag release pieces…
P
Printables
Light Duty Hammer (Metal/3D Bolts, TPU Grips)
A printable hammer with TPU grips meant for light duty, not construction sites. I couldn't make a sturdy 3D printed nail puller, so that is omitted from this design. The hammer has a nice weight and is well balanced when the appropriate…
P
Printables
Honda Motocompacto Handlebar Grips!
I didn't like the handlebar grips, SO I MADE MY OWN! One with little motos, one with the Honda “wing” logo that looked like it would give some good grip. These are a little more difficult to print than the other Motocompacto stuff I've…
P
Printables
COLT 1911 CUSTOM GRIPS
Attention: I keep seeing people selling these models on Esty and eBay: Digital files and actual prints. STOP THAT! I have already gone after a few of them and got them banned. I will pull these off here if this keeps happening. I put…
P
Printables
Handle With Finger Grips
I needed a simple (yet strong) handle to attach to the perspex door of my printer enclosures so I came up with this design that attaches with glue or double sided tape. Print with 0.2 mm layer height, 0.6 mm inner/outer walls, 3…
P
Printables
Magsafe Dual Grips
A very simple design to print! No Supports It's low profile, and pretty useful. Great as a filmmaking tool, watching videos, and some games. I made this for myself since I often use my phone as an external monitor when filmmaking. I…
P
Printables
GoG Enmey Grips
Grips for the GoG Enmey. The stock ones were warping after nearly a decade so I reprinted these in PLA and plan to cover them in flexseal. If I had a capable printer, I would try two layers of PLA and switch to a TPU
P
Printables
Oxford Heaterz/HotGrips Better Controller Mount
30mm hole spacing, but I included the F3D file so you can modify to your needs but this is the same hole spacing thats on the metal bracket the grips come with. Designed for CRF300L, may need slight tweaking for other bikes.
P
Printables
Flysky FS-i6 Grips (Separated)
I did nothing to modify this design, except to separate the two parts into two different STL files so they could be printed (or reprinted) individually. All credit to JCG_RC for the effort to scan and design the grips. Category: R/C…
P
Printables
Drill Dust Collector with Grips
Added some finger tabs to help hold it/keep fingers away from the bit
P
Printables
Crosman 13xx Target Grips
Cut down from the Mk.2 buttstock and given just a bit of palm swell. Will help stabilize aim with one or both hands and compliments the accompanying Pump Arm fairly well. This is an ambidextrous model, though one may forego or install the…
P
Printables
Nintendo Switch adapter grips Multiple angles
These grips have an inward, outward, and neutral option to print. I also sell these on Etsy: https://glacierfrost.etsy.com
P
Printables
PSVR2 Knuckles Grips / Straps
Since the release of the PSVR2 I have been searching for knuckles straps for its controllers, and there have been none,
P
Printables
Xbox Controller BIG Hand Grips
Fits Series 1 elite controller and most regular controllers. May need to add an adhesive to keep them in place. Supports may be necessary.
P
Printables
Honda CBR 600 RR throttle for standard rubber grips
throttle grip model for CBR 600 RR in the years 2003-2007 (I think). Model made in 3 different internal tolerances. From 22.6mm to 22.8mm. Measure your handlebar and match according to the print quality of your printer. The model was made…
P
Printables
Fisher-Price SpaceSaver Cup Holder Adapter for NUK Fun Grips Cups
My kids have started to outgrow their things, and one of those things is the rather small (~74mm diameter) cup holder on the tray of a Fisher-Price SpaceSaver High Chair. The NUK Fun Grips cups we use are about 80mm or so in diameter, so…
P
Printables
Kids bike grips 16.10id
There's two models, choose which one you want. Some retro (30+ yr old) bicycles have handlebar with od 16.10mm which is odd and hard to find. 85mm overall length 16.10mm ID cross pattern and simple round pattern Print time in TPU: 2h
P
Printables
Iphone 13 promax case with switch grips
so you can play ur phone like a ds when using the delta app
P
Printables
Aquael filter holder with cale grips
The filter holder is modified for the AquaEl Shrimp Smart DAY&NIGHT. It securely attaches to the mount on the back of the filter. No supports are needed, and I recommend using three perimeters.
P
Printables
Foot for OXO Good Grips Sweater Drying Rack
I got a couple OXO Good Grips folding drying racks to dry sweaters. My plan was to stack them up on top of my washer and dryer, but the first time I used them, I returned to find my sweaters on the floor. The vibrations of the laundry…
P
Printables
Weller and Pinecil Grips for VLMP Heat Set Insert Press V1
Updated models for the soldering iron grip of the @AdamVector3D 's VLMP Heat Seat Insert Press to fit Weller WES51 (the black grip in the pictures) and Pinecil V2 (the yellow grip in the pictures) soldering irons. The parameters for the…
P
Printables
zhiyun smooth-q4 phone Grips
My friend lost one of the rubber grips for his dongle. So I measured and 3D modeled some for 3D printing.
P
Printables
SCROG Net/Trellis Net Grow Tent Frame Grips (TPU)
SCROG/Trellis Net Grip – Keep Your Net Secure, No Slipping! If you use SCROG or trellis nets in your grow tent, you know the frustration—over time, as your plants grow and get heavier, the net can slip down the tent framing, making it…
P
Printables
Pull Up Bar Replacement Hand Grips
These are replacement handgrips modeled for the Iron Gym door frame pull up bar, but should work for any bar with the same diameter (Bar ID 25mm), or you can probably scale them to fit any bar with other diameters. These are designed to…
P
Printables
Beta C27S tool cart - Gridfinity GRIPS drawer base
I wanted to upload the models I generated for the excellent Beta C27S tool cart using the Gridfinity Generator by perplexinglabs.com. It's a nice snug fit in each drawer, using the GRIPS design to click together. It contains one row of…
P
Printables
OXO Good Grips Deep Clean Brush Set Skadis T-Nut Mount
Holder for the brushes using the Skadis T-nut system. I used an M2.5 to mount it.
P
Printables
1911 Hand Grips
Add any design you want to the top, like a dickbutt design or the Resident Evil Samurai Edge Biohazard look. Whatever you like.
P
Printables
Gridfinity XACTO Gripster Holder (1x1 base)
Gridfinity XACTO Gripster Holder (1x1 base). 6x2mm magnet recesses in the bottom. Printed in PLA with 4 perimeters, supports touching buildplate only, and adaptive cubic 15% infill. I did a filament change to make the text a different…
P
Printables
Parametric Rug Cleats/Grips for Carpeted Floors (SCAD)
If you have rugs/runners on carpet, you know that they will tend to migrate across the floor like an inchworm. It's especially bad on deep pile carpet, which is what I made these for. The shown cleats are all 5x5 cleats with an 8mm peg…
P
Printables
Oxford Heated Grips Controller Bracket
A very slim support for the remote/controller of Oxford heated grips/handle bars for motorcycle, ATV, snowmobile etc. Fastened with 2 zip-ties. Printed and fitted perfectly on my Husquarna (KTM) Svartpilen 401 (2023); its tight and you…
P
Printables
Needle Nose Vise Grips Print in Place
Here is a needle nose variation of my print in place vise grips! I printed mine at 80% scale with a 0.4mm nozzle and 0.3mm layers out of PETG and it worked great! Happy Printing!
P
Printables
Radiomaster Boxer Ultimate Comfort Kit PLA washer for TPU Finger Grips
Added washers for finger grips so that screws hold the TPU finger grips in place. I only tested these with the Grip Wave-Big
P
Printables
1UP Racing bullet connector grips
These battery terminal ‘grips’ take advantage of the M3 thread used in the 1UP Racing 5mm bullet connectors. So they are held by an 8mm M3 flat head screw and make it much easier to remove/install the bullet connector into a shorty pack,…
P
Printables
Borderlands 1911 airsoft grips
Borderlands themed grips for the 1911 airsoft pistol. Best printed in resin Print Settings Printer: photon zero Rafts: No Supports: Yes Resolution: 0.16 Infill: 25% Filament: 3dJake Grey resin Category: Sport & Outdoors
P
Printables
RP5 Grips
Two variations of a grip I designed for the Retroid Pocket 5, featuring Nub technology. STLs for straight printing as is, but STEP files are also available if you want to make changes to better suit your needs. The Full Width grip is a…
P
Printables
Sony lens cap grips (67mm)
Simple grip replacement for a sony lens cap might need to heat up the arms and stretch it a bit out to make the gripper work ---- Update 1: Made the chamfer better to grip the lens
P
Printables
Blue Archive | Millenium Science School | Airsoft M1911 Grips
Recommended: - An FDM Printer - Glue Required: - 2 rolls of different colored filament or 1 roll and paint. Grips and logo are printed separately, if you have a multi material printer I've provided the .blend files (due to how jank…
P
Printables
Push Up Grips (Now with TPU feet)
You can print two of these on their side with paint on support enforcers. I printed mine in PETG with a .6 nozzle @.4 layer height. Plenty sturdy with those settings. edit: After thousands of pushups on multiple surfaces I noticed they…
P
Printables
Knurled Hand Grips for the Daytona Harbor Freight Car Jack & Others
UPDATE: NEW INTERNAL CLAMP STYLE ARE EXTREMELY EXPERIMENTAL NOTHING HAS NOT BEEN TESTED YET!, WHEN I TEST IT AND CONFIRM WORKING, I'LL REMOVE ALL OF THIS BETA STUFF AND WARNING. Same M10 as stated below can be used if you are feeling…
P
Printables
Comfort Grips for Lenovo Legion Go
This is NOT a physical item! This is a digital file or set of files used for 3d printing! Make your Lenovo Legion Go much more comfortable with our 3d printable high quality comfort grip STL files! Eliminate hand pain caused from the…
P
Printables
HyperX Pulsefire Saga Mouse with Diamond Grips
Important Notes about the Model Model folders include the best front to go with the model, but it's still up to you. The Buttons-with-grips file is recommended for printers that can handle higher detail. With lower-quality printers, you…
P
Printables
Oxford HotGrips heated grips controller bracket for 22mm handlebar
Update: Due to popular demand (an astonishing number of 0 downloads), I have updated the file in case you don't have the alu inserts available. Now there's a widened version with no pre-drilling required, and a version for an M4 nut.…
P
Printables
GripSlide – Bag Clip Edition
🔹 GripSlide – Bag Clip Edition Print-in-Place | No Springs | PLA-Friendly | Kid-Safe Say goodbye to weak hinges, warped arms, and stale snacks. GripSlide is a minimalist, print-in-place bag clip that uses a sliding wedge mechanism to…
P
Printables
Parametric vice jaw soft grips TPU (F3D) - Fully customisable
Vice jaw soft grip. Parametric; measure existing vice jaw height, width and depth and update parmaters file in FUSION 360. F3D file. Fully cusomisable. 3 off 6mm dia 3mm depth magnets will press fit in, magnet holes will autospace…
P
Printables
Freerunner V2 - Extended Muzzle / Front End with picatinny mount for foregrips.
---------------------------------------------------------------------------------------- Description ---------------------------------------------------------------------------------------- This is an extended muzzle/front end for the…
P
Printables
CMF Phone 2 Gaming Grips
Add comfort and ease of use to the CMF Phone 2 Pro with these easy to attach grips. Modeled to match the profile of a standard ps4 Dualsense controller, these grips will make gaming on your phone much more comfortable. Supports should be…
P
Printables
Ruger Mark IV Target right hand grips
Do you have a Ruger Mark IV Target? Are you right-handed? Do you find size 12 gloves a bit tight? Here are several versions of various sizes. The 15.81mm grip is more for smaller hands but the others are for large hands. If I make any…
P
Printables
Gophert NPS GripStack Plates v.1
There are two different types of plates, bottom plates for adding grip tape, and bottom plates for stacking. If enough people find them useful, I will redesign them to use screws/bolts through OG holes for more secure mounting, instead of…
P
Printables
Harness Grips for Schroth 2" Wide Racing Harnesses
A brim is recommended for adhesion. Designed for printing with PETG. Due to the locking caps, please note that removal from the harness will break the clips off and they will need to be printed again if removed.
P
Printables
Wandhalter für rutschfeste Werkstückstützen (TriGrips)
Wandhalter zur Aufbewahrung von vier TriGrips (rutschfeste Werkstückstützen für die Holzbearbeitung) An der Wand zu befestigen mit zwei M4 Senkschrauben.