Zuca Cart Handle Grips
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Various grips for Zuca Disc golf carts that are very snug so no need for set screws/adhesive/tape
- Rating
- 4.833 / 5
- Likes
- 41
- Downloads
- 580
- Makes
- 6
- Views
- 1,713
- Reviews
- 6
Updated at source:
Model information
- Source
- Printables
- Category
- Other Sports
- License
- Creative Commons — Public Domain
Unsatisfied with the current state of grips for Zuca cart, I've decided to create my own that forgoes the need of any set screws/adhesive/tape and solely relies on an extremely snug fit but with the ability to be somewhat removed.
I've provided an Onshape link and a fusion360 file so you may also create your own patterns/designs.
This model is optimized for 0.6 mm nozzles with a line width of 0.72mm.
TPU is the preferred filament. Depending on the grip pattern there may be mild overhangs, with a tuned printer and dry filament they print quite easy and shouldn't cause too many problems.
Printing Parameters:
- Layer Height: 0.20mm
- Top/bottom Layers: 4
- Perimeters: 2 (textured models)
- 3 (Blank)
- Infill: Concentric (textured)
- Avoid Crossing Perimeters: Yes
- Fuzzy Skin can be enabled for the blank model