Zuca Cart Handle Grips
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Various grips for Zuca Disc golf carts that are very snug so no need for set screws/adhesive/tape
- Ocena
- 4,833 / 5
- Polubienia
- 41
- Pobrania
- 574
- Wydruki
- 6
- Wyświetlenia
- 1702
- Oceny
- 6
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Sports
- Licencja
- Creative Commons — Public Domain
Unsatisfied with the current state of grips for Zuca cart, I've decided to create my own that forgoes the need of any set screws/adhesive/tape and solely relies on an extremely snug fit but with the ability to be somewhat removed.
I've provided an Onshape link and a fusion360 file so you may also create your own patterns/designs.
This model is optimized for 0.6 mm nozzles with a line width of 0.72mm.
TPU is the preferred filament. Depending on the grip pattern there may be mild overhangs, with a tuned printer and dry filament they print quite easy and shouldn't cause too many problems.
Printing Parameters:
- Layer Height: 0.20mm
- Top/bottom Layers: 4
- Perimeters: 2 (textured models)
- 3 (Blank)
- Infill: Concentric (textured)
- Avoid Crossing Perimeters: Yes
- Fuzzy Skin can be enabled for the blank model