1 / 6
GPD Win Max 2 Grips
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A simple frame + left/right grips
- Rating
- 4 / 5
- Likes
- 17
- Downloads
- 784
- Makes
- 2
- Views
- 5,796
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution — Noncommercial
Print vertically for best strength.
Rails might be too loose or too tight depending on 3d printer settings, use a hammer and/or glue if needed. :)
Settings I used:
0.20mm layer height
15% infill
Support for critical overhangs
Filament: Light Blue PLA
Printer: Bambu Lab X1 Carbon