Counting matching models…
2024/02/17 Update : New design V105 for those who wants a tight fit : Ultra tight fit : making use of the screw holes of the WM2 to clip in, grips are making one with the computer body Standing mode : new stand and angle let me know what…
Print vertically for best strength. Rails might be too loose or too tight depending on 3d printer settings, use a hammer and/or glue if needed. :) Settings I used: 0.20mm layer height 15% infill Support for critical overhangs Filament:…
Printing Instructions: Materials: PLA, PETG, or ABS Support: 60-65 degrees (overhang) Infill: 10-20% Cubic INFO: My friend recently purchased the GPD Win 4 and needed a case, but there is none in the market yet other than 3D-printable…
Front covers for the GPD Win 4 This will work with Grips/No Grips. The No-Grip model can be printed as is and should just fit right now. Works with most thumb grips I've tried. I would highly suggest using some sort of felt tape on the…
Full instructions here: https://wallnutts.github.io/projects/ Problaby the first ever 3D printed GPD Win Mini case available! Comes with detachable screw-on flat grips. The added thickness of the case, even without the grips, also allows…
Tried most grips that are available for 3d print, but this is the one I like the most. (Thanks Qaz!) Like the quick release and no bulky tray to hold the laptop. But not a big fan of the loose hinge. So I moded it to use M3 screw as a…
Handles for the GPD win max 2. Simply slide them from the side, the fit is snug enough for the handles to stay secure while holding the device. My main goal was keeping my palms cool while playing, but an unexpected side benefit is that…
I printed in PETG since it gives it some heat resistance and a bit of flexibility so adding/removing it from the device is a bit easier. These were the fans that I ended up using: https://amzn.to/44zJpIn I designed this around an existing…
PLEASE READ: The frame for the grips is pretty tight and one of the tabs might poke your USB or SD card ports when you put the frame on. Its also a bit of a tough one to take off, so I have to push on the tabs near the joystick on the…
This design takes imo the best parts of gmelikov, Lok and 3Doodler's remixes of Qaz's amazing original to create one which strongly grips onto the win max 2 with the qol features of the other remixes. I've read a lot of comments about the…
I need a dock for my GPD Win Max 2, so that I can attach an USB Hub to the back and connect Win Max2 with additional Ethernet cable, 100W PD Charger, HDMI cable and a few USB3.0 type-A ports. The USB hub I used is Philips 5-in-1 USB Hub…
This item snaps to the back of your GPD Win 4 device and has a Deckmate port so you can use those accessories.
I made these slip on shells to help keep the heat off your hands and to add various grips for the GPD Win Mini.
Here is a drop in dock for the GPD Win Max 2, to me it is holding it at the perfect angle to type on while able to get plenty of air flow to the vent. I cut out for the speakers, USB ports, micro SD cards etc. This is big so it probably…
In case you wanted to have replacement parts or make a spot where you could bolt on accessories, here are models of the covers. I also modeled 2 variants that can be printed with out supports. I have tested them using .4mm nozzle and it…
Here is a drop in dock for the GPD Win Mini v2 I added a groove up front to make it easier to get in and out. I printed it in PLA with no supports
A simple adapter I designed to mount some JoyCons to the sides of my GPD Win Mini (2023/2024). Now you might be asking, isn't that a little bit pointless… well yes, but at least now it feels less like your twiddling robot nipples when…
I made this to give my GPD Win Max 2 a better grip and to protect the backside of the display from scratches and to let it look pretty individually and specific. I made it using OpenScad with a self developed algorithm, where you can set…
Had this Cenxaki dock from when I had an AYANEO Air. The GPD WIN 4 was too thick to fit in the dock but I didn't think it would make sense to buy another dock. Whipped up a rough adapter and it works. Might go back and streamline it but…
This is a mod to allow a bar to go across and hold the grips firmly. Includes: Socket for a bar to go into* Extra lip by the Keyboard to hold the GPD a little better. Holes for M3 Socket head screws * the bar should in theory only be…
A custom modeled, tested, and iterated-upon grip design for the GPD Win 3 for people with sizable hands Print Settings Printer Brand: Prusa Printer: i3 MK3 Rafts: No Supports: Yes Resolution: 0.1mm Infill: 2% support cubic Filament:…
I modified the previous dock created by jackmax9999 to include an area to hold a UGREEN USB-C hub (Amazon link below). Seems to hold well, however, if you run into issues inserting the dock, I recommend heating up the Print to basically…
This is a remix of the grip from gennro. It includes screw holes that lines up with the built in holes for the GPD Win Mini. I recommend using longer screw for the bottom sockets. 1.4 x 10mm screws will fit perfectly.
This is a container whose primary purpose is to protect the triggers and bumpers of the GPD Win Mini when it's put inside another bag. The container has nubs in the ends to offset the bumpers and triggers so that no pressure is applied to…
Print on the skinny flat side as illustrated on the picture for the model with no supports and you're all set!
Original model is really great, I just wanted to leave in-place my usb dongles (for ex. mouse) while using grips.
The rubber feet on the GPD Win Max are an odd size and replacements can't be purchased, so we made our own :)
Here is a lay in dock for the GPD Win Mini for when the grips are attached. v2 Added a groove in the front to make it easier to get in and out, also I rounded the front edges. Printed in PLA no supports.
This contains two parts: pen.stl is the pen cradle and contains the cavity where the magnets are installed (I use 6.35mm x 2mm button magnets.) base.stl is a riser that holds the bumpon feet (I use 12mm diameter ones). Push the magnets…
As far as I can tell this is the only Win 3 Mini PC case available on the internet as of the end of 2023. If someone thinks they can make a better case, please do so, and send me the link afterwards so I can use it myself. This is not a…
Decided to try and design a pair of grips for the GPD Win Mini, uploading it here so mayb it can serve as an inspiration for other designs. No, you cannot close the device when the grips are installed. !!! WARNING !!! This is uploaded for…
Printing Instructions: Materials: PLA, PETG, or ABS Support: 60-65 degrees (overhang) Infill: 10-20% Cubic Reference (Instructions directly translated from original text file): Description of GPD Win4 v1.4 Enhanced Grip 3D Printing Kit:…
The GPD Win 4 is a fairly compact PC handheld, but unfortunately has very few available accessories. So I decided to make one myself. Note that this is my first ever 3d print design project, so apologies if you encounter any issues. I…
I didn find grips for 2025 so made it. This is v0.5 cause i dont figure how to attach it to my gpd (now it can be taped or glued but meh) Pls write in comments how to improve it especially how to make attaching system, ill do it. You can…
Overview A print in place GPD XP Plus (or XP) folding dock. It's a a really snug / solid fit for the device There's space below the device for an L-shaped USB-C cable (DC in or TV out) and 2 options for cable management; one via side game…
Replacement for the Joystick of a GPD Win3
Reuoloading to Printables to enable non-logged-in file access for those who don't have an account at the original host site.
This project contains 3D-printable files for a case that transforms the https://www.gpd.hk/gpdwin42025 into a versatile computing module. The module is optimized for use in four modes: Mini-PC : a compact desktop computer with external…
Quick and dirty Joy-Con grip for the GPD Pocket 3, at least until someone designs a better one. Print time is approximately 12 hours at 0.16 mm layer height and 100% infill (recommended for screw stability). Requires rails salvaged from…
I took the clip portion of thing:6100878 and put the double deckmate connectors from the steam deck clip onto it. This is a first draft, but it seems to work, so while it could be improved, I probably won't update it. I printed with bulk…
Besure to get a joy-con wrist-strap for the actual attachment!!! It's actually very cheap so i'm sure you'll be able to get one After all that just screw it in the attachment
I didn find grips for 2025 so made it. This is v0.5 cause i dont figure how to attach it to my gpd (now it can be taped or glued but meh) Pls write in comments how to improve it especially how to make attaching system, ill do it. You can…
Here is a drop in dock for the GPD Win Mini v2 I added a groove up front to make it easier to get in and out. I printed it in PLA with no supports
Stylus holder for the GPD Pocket 3. Requires 2 M3x8 metric bolts. Main unit does not require supports. The Holder unit does.
Spacer for the GPD Duo Kickstand to access back ports (Oculink, Ethernet) and provide airflow for back exhaust. Friction fit, no glue or extra parts. Easily removable.
This is NOT a physical item! This is a digital file or set of files used for 3d printing! Give your handheld GPD WIN 4 the comfortable grip it deserves! Eliminate hand cramps and fatigue with this comfortable grip case STL file! Our 3d…
GPD Pocket 4 Box for your expansion Cards and a littel Screwdriver :) Material ABS, Layerhight: 0.2 Infill: 15% No support
Besure to get a joy-con wrist-strap for the actual attachment!!! It's actually very cheap so i'm sure you'll be able to get one After all that just screw it in the attachment
Replacement rubber feet part for GPD Pocket 2 laptop. I have printed mine with transparent TPU and 0.2mm layer height. Model requires printing with support. I have printed mine with a raft as well. You will need some adhesive to install…
A gamepad holder for the GPD win 1 after the design of the " Epic ultra" Its a simple drop in design that locks on the upper two pins. Once into position its a solid fit and wont come off. It grips a ton better then in its original state…
A friend asked for one of these, it was too large for my print bed so I split it up with a band to glue and re-secure. I have it mocked up in PLA and am looking forward to seeing how it works out for them. I originally made the band a…
The part is hooked over the keyboard and attached to the notebook with two M3x10mm countersunk screws. The joycon rails can be removed from a grip or bought as spare parts. One of the USB-A and the USB-C ports are still usable with the…
![[Remix] 3 Piece - Soft Filament Holster for GPD Pocket Laptop](https://media.printables.com/media/prints/478153/images/3910544_76d603d9-09f9-4f44-af54-dcbe064c1eae/c7ebee59f4f7b3e9f3ff9cf5ec37db83_display_large_478153.jpg)
