1 / 3
Bolt-on Grips for GPD Win Max 2
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a mod, I added a socket for a bar to go across the back and a small protrusion to help grip by the Keyboard.
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 75
- Makes
- 0
- Views
- 1,659
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a mod to allow a bar to go across and hold the grips firmly.
Includes:
- Socket for a bar to go into*
- Extra lip by the Keyboard to hold the GPD a little better.
- Holes for M3 Socket head screws
* the bar should in theory only be 2-3mm high, except where it is inside the grip it can be 6mm to allow for M3 screws and possibly brass inserts. Bar will be made later once I can print this and check the dimensions.
Other options:
- Make the bar of metal and tap it.
- Make the bar break in 2 pieces and clip together in the middle somehow.
- Use All-thread or a coupling nut to join the two grips (protect the finish with softer sleeve over the threads)
- Use some small zip-tie “nylon wire tie”
Printing:
- Print nose down
- Use a Raft, its a tall model.
- Use support (48 Degrees slope)
- Only one is provided, mirror it to get the other side.