Counting matching models…
The ever popular Ozark Trail 7.5" knife has not-so-nice orange scales. I decided to design replacement scales that you can print. I've tweaked the model a bunch to get it correct and I'm pretty close. Do let me know if you print this and…
So, the Ozark Trail pop-up canopy tents are pretty popular in Canada, and I've had mine for little more than one year. This year, I didn't peg it down and the wind flipped it over (upside-down) and this stressed the center hub, breaking…
The arm-rests on many Ozark Trail camp chairs are held in place by a fabric strap. This has a tendency to wear out and break loose. This clamp is placed below the arm-rest to hold it in place. My work is all free forever. If you want to…
Simple as it seems. Fits your oversized coffee mug. Works with my my ¾ ton Chevy 2016 work truck.
This is a spacer you can use if the screws on your knife are too long for the 3d printed scales that this was remixed from. I'm not totally sure if the negative and positive volumes I added will apply correctly unless you open it in…
https://www.walmart.com/ip/Ozark-Trail-7-5-inch-Slide-Lock-Folder-Folding-Knife-with-Ball-Bearing-3-3-inch-D2-Blade-Belt-Clip/5420562258?classType=REGULAR&athbdg=L1103 A good knife for the price but I wanted black handles for the knife. A…
I recently lost one of the knobs for this stove and created a replacement. When printing this bear in mind that at least my stove had the shaft key in 2 different positions based on if it was the left or right burner. While this could…
Have a cup, need a handle? Print instructions Inspired by jasonalday designs https://www.thingiverse.com/thing:2668183 Needed a handle that attached at the bottom to not obscure the grinch face on my mug. No glue or adhesive needed, the…
Ozark Trail 32 oz Vacuum Insulated Stainless Steel Tumbler handle 3-4 walls 15-25% infill PLA+ , PETG or ASA something water resistant.
I've had an Ozark Trail 52 qt Cooler for quite a while. It has lost one of its feet, so I modeled one of the remaining feet and printed replacements. I print this in PETG at .2mm layer height with only painted on supports under the hole…
Intro: I tried printing @MatthewTimbs scales, but they needed to be a bit thicker for the pivot bolt to clamp properly. Therefore, I took his model and added some thickness! Files: OT7.5SCALE_LEFT1.1 - Left Scale OT7.5SCALE_RIGHT1.1 -…
Just a tumbler handle with a design reminicent of a broomhandle. Remixed for asthetics and sized to fit Magellan tumbler. Category: Outdoor & Garden
I tried the other variation that was made on here and it didn't work for me. I took some time and modeled it off the broken piece. It's almost an exact replica of original part.
A fix for the arm if the fabric is ripped by the original screw.
Part for Ozark Trail 12 Person Cabin Tent WF20984
This is a replacement lid for the Ozark brand 24 fl oz water bottle.
I store my filament in a garment storage vacuum bag with some desiccant, but when I change filament late at night I don't want the noise of firing up my vacuum to evacuate the bag. I remembered we have a nice high volume low pressure air…
This is a handle for the Ozark brand of the "Yeti" style tumblers sold at WalMart. It has an opening in the front so you can put an engraving or stenciling on your mug and still see it. Enjoy and let me know if you have any questions.…
Used to replace missing feet on an aluminum Ozark trail backpacking chair. Press fit.
the button on my ozark trails pen light sets so proud that its easy to accidentally turn it on. this guards that by making the button more recessed. two versions one simple the second a little more stylized prints upside down so no…
Slider for Ozark Trails lids. Be careful which way you press in the magnet. Put it on the lid and check the polarity first. The magnet 10x3 m found on Amazon.
I made this handle for my Ozark trails 32oz tumbler. it's secure with three 3m screws and heat inserts.
Replacement stove dial compatible with Ozark stove I found the oem dials for my ozark stove stuck out way to far and would get caught on everything when storing and moving around the stove, so I designed some slim replacement dials. For…
At a point in time when I had misplaced the lid to my travel coffee mug, I designed this sealing replacement top. It prints in two pieces. One is the hard plastic lid. The other is the soft rubber seal. The best TPU for this is Ninjaflex.…
This handle is not directly compatible with Coleman coolers (could be with modifications). This handle allows a Ozark Trail steel cooler to be adapted to use the latch from a Coleman cooler (the latch will need the mounting holes narrowed…
Only hardware needed is (8x) M3x30 machine screws and (8x) M3 nuts. Please print with solid infill. I used 99 percent and rectilinear. No supports.
This top tray emulates the function of the "SmartShelf" that other coolers offer to keep soft or dry items separate from the ice and lower items. It was designed to sit on top of the hardliner and fit standing cans below with some extra…
Ozark Trail Tailgate Table replacement clips to hold garbage bag
Only hardware needed is (8x) M3x30 machine screws and (8x) M3 nuts. Please print with solid infill. I used 99 percent and rectilinear. No supports.
Part for Ozark Trail 12 Person Cabin Tent WF20984
Replacement for the plastic ring that goes around Ozark Trail water bottles that allows it to attach to a carabiner. Print in 95A TPU. You will have to rotate the model to lay flat on the bed like in the photo. I'm not entirely sure why…
these parts use the original hardware and should be a direct relpacement for the original brackets. The sliding bracket requires the use of the original lever, spring and pin from the original bracket. you may have to ream the pin hole…
Simple friction-fit covers to replace ones that may have also been lost for an Ozark Trail Ridge bike. Printed in .20mm layer height with PLA+ . Print down on the flat surface with no supports or rafts. Update 04/27/25 - Added additional…
A wonderful historic relief print of the Ozark Bath House in Hot Springs Arkansas. I used a photo to relief software from MakerWorld to make the relief from the image. I printed it with ELEGOO - Marble PLA I used my diode laser to cut out…
Jig/assembly/adaptor to allow you to print on a 24oz Ozark Trail bottle using the rotary bed on the Eufymake E1 UV printer.
This is a simple hook to keep the wheel retaining arms down against the rack when not in use. Through bumpy roads the retaining arms can come out and scratch your car. This hook solves that. Simply install with an M6 screw and a little…
New battery clamp to replace the stock one inside the Ozark Trail BT speaker + lamp combo P/N: 20649 I had dropped my lamp while fishing and it proceeded to stop working and start making a horrible rattle/clunking. When I opened it up I…
This adapter converts Walmart's walkie-talkie to a 25mm x 25mm square. I designed a separate adapter that takes the same square for use on my motorcycle, so I could mount this popular, cheap, and hardy FRS-band walkie talkie to my…
