1 / 3
IKEA MALM Bed CPAP Hose Holder & Management Clip — zdjęcie 1
1 / 3

IKEA MALM Bed CPAP Hose Holder & Management Clip

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

IKEA MALM CPAP Clip. Stops hose pull & tangles. Hot water dip for a custom tight fit! Simple & discreet. 👍

Ocena
0 / 5
Polubienia
2
Pobrania
16
Wydruki
0
Wyświetlenia
101
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Bedroom
Licencja
Creative Commons — Attribution — Noncommercial

Title: IKEA MALM CPAP Hose Management Clip - Perfect Bedside Holder

Tired of your CPAP hose pulling on your mask or getting tangled in your pillows? This custom-engineered clip is the perfect solution for users of the IKEA MALM bed series. It slides directly onto the vertical headboard support, keeping your hose elevated and organized throughout the night.

The design features a secure "locking" cradle where the hose snaps into place, ensuring it won't slip out even if you move during sleep. It’s a simple, discreet, and highly functional upgrade to your sleep therapy setup.

💡 Pro Tip for a Custom Fit: To ensure the clip stays firmly attached to the bed frame without any wobbling:

  1. After printing, dip the two "arms" of the clip into hot water for a few seconds until the plastic becomes slightly pliable.

  2. Carefully bend the arms inward to narrow the gap and create a tighter opening.

  3. Hold them in that position until the plastic cools and sets. This simple adjustment creates a custom tension fit that grips the wood perfectly!

Printing Recommendations:

  • Material: PLA or PETG (both work great with the hot water trick).

  • Supports: None required.

  • Infill: 20-30% for durability.

  • Walls: 3 or 4 walls for better spring tension.

👍 If you find this design helpful, please leave a Like—it really helps support my work and allows me to share more fixes for everyday problems!

Tagi