1 / 1
Pint in place ball joint tolerance test piece 12mm pockets, 0.1mm undersize balls — zdjęcie 1

Pint in place ball joint tolerance test piece 12mm pockets, 0.1mm undersize balls

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

test ring for approximate ball joint tolerances for a print in place all in one ball joint.

Ocena
0 / 5
Polubienia
3
Pobrania
18
Wydruki
0
Wyświetlenia
108
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Other Ideas
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

this is a test ring that i made to try to work out approximate ball joint tolerances for a print in place all in one ball joint.   the ring as 12mm pockets (12 of them) and then the balls are undersized by 0.1mm each starting at 12.0mm, 11.9 etc, down to 10.9mm.    The oval shape in the end of the balls is for a common joystick shaft electronic component.   

Created using FreeCAD 1.1.0

Tagi