Cover for National Window Casement Window Actuator
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Cover for National Window actuator. Specific, but common. Used with some folding cranks. Accepts 8mm imbedded magnet
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 6
- Wydruki
- 0
- Wyświetlenia
- 59
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Decor
- Licencja
- Creative Commons — Attribution — Noncommercial
I ended up with a batch of magnet folding casement window handles. This is a facade for my National Window actuators that mates them up with the handles. You could use the facade with new plane handles to dress up your actuators (cover all the accidental paint :) ) . They should look pretty good stand alone with a normal handle.
Slip on mount, no screws needed.
There is a space for an embedded 8mm by 3mm magnet if you set up a pause in your print. I've printed these in PETG, without supports with the hole for the handle on the bed. (See the *.3mf file)
If you've replaced your National Window actuators with Primeline or Truth actuators I think these will fit.