Easter Egg, Hanging or Standing, Can be Opened
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
An Easter Egg decoration that can be filled with candy.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 12
- Wydruki
- 0
- Wyświetlenia
- 87
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Spring & Easter
- Licencja
- Creative Commons — Attribution — Share Alike
This model is an Easter Egg that can be filled with candy as a gift. It can be standing or hanging for decoration. You can simply screw it open and close.
The broad side of the egg is flattened for standing and contains a hook for hanging - this way you have both choices, just as your mood moves you.
The FreeCAD 1.0 file is included.
Printing
I included GCode for Prusa MK4S with a HF0.4 nozzle and Prusa MINI+.
Other Prusa Printers: use the 3mf PrusaSlicer project as a starting point.
Other slicers: start from the 2 STLs. The bottom part should be printed standing normally and needs no supports, activate a brim if your print bed tends to have low adhesion. The top part should also stand normally - I recommend an outer brim and a narrow support for the topmost overhang.
Happy Easter!