Easter Egg, Hanging or Standing, Can be Opened
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
An Easter Egg decoration that can be filled with candy.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 12
- Makes
- 0
- Views
- 87
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Spring & Easter
- License
- Creative Commons — Attribution — Share Alike
This model is an Easter Egg that can be filled with candy as a gift. It can be standing or hanging for decoration. You can simply screw it open and close.
The broad side of the egg is flattened for standing and contains a hook for hanging - this way you have both choices, just as your mood moves you.
The FreeCAD 1.0 file is included.
Printing
I included GCode for Prusa MK4S with a HF0.4 nozzle and Prusa MINI+.
Other Prusa Printers: use the 3mf PrusaSlicer project as a starting point.
Other slicers: start from the 2 STLs. The bottom part should be printed standing normally and needs no supports, activate a brim if your print bed tends to have low adhesion. The top part should also stand normally - I recommend an outer brim and a narrow support for the topmost overhang.
Happy Easter!