Ikea HOL Castor Adaptors
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
These little adapters allow you to take a castor foot and attach it to the bottom of a IKEA HOL coffee table
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 12
- Wydruki
- 0
- Wyświetlenia
- 265
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Living Room
- Licencja
- Creative Commons — Attribution
Using some cyano glue, some M5 nuts and bolts and these casters you can give your HOL coffee table storage wheels.
Can be printed in PLA or PETG.
Model contains 4 feet, because, why would you want less than 4 casters on your coffee table?
For each foot, you will need
- 3 x 8mm M5 bolts
- 1 x 16mm M5 bolt
- 4 x M5 Hex Nut
First, press fit the hex nuts into the adapter (maybe with a touch of glue, but they should be pretty solid). Then, threading the bolts through the casters, screw the bolts up till the caster is fully attached.
Then apply cyano glue liberaly inside the L shaped indent. If you have an accelerant part, apply this to the wood and the 3D printed part before applying the glue. Then press the casters into place - it will require a bit of force to get them fully on.