Strain Relief/Holder for 10 awg MC4 solar cable
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a strain relief/holder designed for two pairs of 10 gauge mc4 solar cable into a Victron mppt 75/10 controller.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 9
- Wydruki
- 0
- Wyświetlenia
- 170
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Public Domain
This is a strain relief/holder designed for two pairs of 10 gauge mc4 solar cable into a Victron mppt 75/10 controller. It is designed to stand the cables off and feed the Victron controller at similar standoff height inside of an enclosure. It is printed with PETG to withstand heat from a charge controller within an enclosure, but PLA may work fine for many other applications. It will print and function just fine but the spacing for the standoff legs is a bit unsatisfactory. It is likely to result in "residue" between the legs that can be difficult to remove.