1 / 2
Strain Relief/Holder for 10 awg MC4 solar cable — image 1
1 / 2

Strain Relief/Holder for 10 awg MC4 solar cable

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

This is a strain relief/holder designed for two pairs of 10 gauge mc4 solar cable into a Victron mppt 75/10 controller.

Rating
0 / 5
Likes
4
Downloads
9
Makes
0
Views
170
Reviews
0

Updated at source:

Model information

Category
Electronics
License
Creative Commons — Public Domain

This is a strain relief/holder designed for two pairs of 10 gauge mc4 solar cable into a Victron mppt 75/10 controller. It is designed to stand the cables off and feed the Victron controller at similar standoff height inside of an enclosure. It is printed with PETG to withstand heat from a charge controller within an enclosure, but PLA may work fine for many other applications.  It will print and function just fine but the spacing for the standoff legs is a bit unsatisfactory.  It is likely to result in "residue" between the legs that can be difficult to remove.