1 / 2
Full Frontal Gantry SLM XY joiners for 20 x 20 extrusion/tube for Rat Rig V-Core 3/3.1 printers — zdjęcie 1
1 / 2

Full Frontal Gantry SLM XY joiners for 20 x 20 extrusion/tube for Rat Rig V-Core 3/3.1 printers

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Hybrid SLM XY joiners for 2020 aluminium extrusion or 20 x 20 titanium tube for Rat Rig V-Core 3/3.1 printers

Ocena
0 / 5
Polubienia
5
Pobrania
16
Wydruki
0
Wyświetlenia
162
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

This version of my Full Frontal Gantry XY hjoiners are designed to be SLM printed and are for use in my Rat Rig V-Core 3 and 3.1 hybrid upgrade kit that can be found at the following link:

https://www.printables.com/model/902728-rat-rig-v-core-3-and-31-compatible-hybrid-upgrade

Note this design has now been tested and I am very happy with the results. Very light weight and rigid. These are orderable from Funssor via Aliexpress.

The CNC versions of these that I have also designed (that are now sold by Funssor) will be more accurate than these ones and provide superior alignment. The STL and STEP files for the CNC version can be found at the following link:

https://www.printables.com/model/1430210-full-frontal-gantry-cnc-xy-joiners-for-20-x-20-ext

Please note I get and ask for no payment or royalties from Funssor but even though these are covered by an Open Source - Non Commercial license, they do have my permission to make these for the community.

The bearing stacks are designed to be held in place by 3mm screws that screw into the top and bottom of a 5mm OD aluminium barrel that sits in side the bearing stacks. 

This arrangement is both lighter and more precise than using the usual 5mm screws.
Feedback is invited and valuable.

The X-stop bumper and cosmetic plug should just be 3D printed in your preferred plastic.

Please click here  for the other parts you need for a full hybrid upgrade including motor plates, belt tensioners and Y stops and bumpers. https://www.printables.com/model/902728-rat-rig-v-core-3-and-31-compatible-hybrid-upgrade.

BOM
2 x M5 x 28 Flat Head Cap screws.
2 x M5 x 10mm Socket Head Cap screws.
4 x Aluminium threaded ferules 14 x 50D x 3mm ID thread.
8 x M3 x 10mm Flat Head Cap screw.
8 x M3 aluminium countersunk washers.


Coffee fund
I except no kick backs or royalties from third party companies such as Funssor who manufacture stuff I model and post on Printables.

If you decide to make a donation to my coffee fund (which keeps me up late at night doing more of this stuff) I would appreciate it. There is absolutely no obligation for you to do this. My PayPal account is [email protected]

Please remember to post feed back as it is always valuable to me for future iterations.

Many thanks.
Liam Venter
MFBS Design

Tagi