Suction cup/magnetic breadboard mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A magnetic/suction cup mount for 1/2 (half-sized) breadboards. For whiteboards and strange places.
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 35
- Wydruki
- 0
- Wyświetlenia
- 862
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution
A magnetic/suction cup mount for 1/2 (half-sized) breadboards. For whiteboards and strange places.
These attachment methods were tested with this print:
Adams Manufacturing 7000-75-3040 Mini Suction Cup Hook, 3/4-Inch - (The trick to getting these in is turning while pushing the stem in)
A STEP file breadboard.step is provided for remixing/modifying/experimenting!
Printing
Some items are optional, but these are necessary for a full print:
bumper-1.stl
bumper-2.stl
breadboard.stl
If a center-only badge magnet was chosen:
- center-retainer.stl
For more magnets (if you really need to hold something heavy):
retainer-block2.stl
retainer-block1.stl
And to block off the empty slots (for use with the adhesive foam pad on most breadboards):
- slot-cover-tabs.stl