1 / 2
Compact paper bag holder for biowaste bags — zdjęcie 1
1 / 2

Compact paper bag holder for biowaste bags

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A simple holder for paper biowaste bags with M4 mounting holes. Can fit in a tight waste cabinet.

Ocena
0 / 5
Polubienia
6
Pobrania
22
Wydruki
0
Wyświetlenia
100
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Kitchen
Licencja
Creative Commons — Attribution — Noncommercial

Print two of these to hold paper biowaste bags. Mounted with 4 M4-M4.5 screws. Fits about 30 biowaste bags and can be mounted easily in a waste cabinet.

Can be printed in PETG or PLA but it doesn't really matter. Print orientation is as is for maximum strength but use tree support due to the orientation. Layer height doesn't matter. I printed it with 0.3 mm height for a faster print. 60% infill for example gyroid. Takes 45 min to 3h depending on the filament and settings and about 45g filament.

Tagi