1 / 2
Compact paper bag holder for biowaste bags
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A simple holder for paper biowaste bags with M4 mounting holes. Can fit in a tight waste cabinet.
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 24
- Makes
- 0
- Views
- 102
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Attribution — Noncommercial
Print two of these to hold paper biowaste bags. Mounted with 4 M4-M4.5 screws. Fits about 30 biowaste bags and can be mounted easily in a waste cabinet.
Can be printed in PETG or PLA but it doesn't really matter. Print orientation is as is for maximum strength but use tree support due to the orientation. Layer height doesn't matter. I printed it with 0.3 mm height for a faster print. 60% infill for example gyroid. Takes 45 min to 3h depending on the filament and settings and about 45g filament.