Single limb bow hanger for saddle hunting
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Single limb bow hanger for saddle hunting with a 10mm or smaller rope as a sys strap.
- Ocena
- 0 / 5
- Polubienia
- 10
- Pobrania
- 87
- Wydruki
- 0
- Wyświetlenia
- 438
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Single limb bow hanger for saddle hunting with a 10mm or smaller rope as a sys strap. I double the use of my lineman rope (hang free 10mm kit) for my sys hanger when saddle hunting. One less thing to carry and I do not often select trees with limbs anyway, for convenience. I put a small hole for standard 550 paracord to be used to tether the hanger to the lineman/sys strap rope so it will not fall during placement, and you can slide it wherever needed. I put a few teeth on the backside to hold into tree and limit the chance of slipping into a tilted position. So far this has served me very well and is small enough where I do not need to worry about printing something that requires folding. It fits well into my syshauler bag and also roll up pouch (tethrd). Hopefully, someone will find it useful!
The hook opening is made to snugly fit a 10mm rope.
The small hole is designed for 550 cord.
The extension is about 30mm at the bottom of the opening and maxes out around 40mm to safely hold a bow (my bow is diamond tactical/bowtech).
My personal print is with PLA Super+ and nearly all angles are radiused to provide strength.