Cereal Drybox Cap with integrated dust filter (hexagon variant)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A cap for the original lid of the popular hexagon cereal boxes with a small compartment for a sponge dust filter.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 19
- Wydruki
- 0
- Wyświetlenia
- 167
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- GNU General Public License v2.0
A set of caps for the original lid of the popular cereal boxes with a hexagon on the lid. The caps include a compartment for a small piece of sponge to act as a dust filter and are designed for PC4-M10 fittings. The threads shouldn't require a thread cutter, but might still be a bit tight when printed in PETG - just gently force them in with a 10mm nut on a ratchet to make sure they remain straight, but the horizontal variant should have enough clearance for a wrench just in case.
The caps come in a classic vertical and a more compact tilted horizontal variant. Both have a pocket to mount a coupler cap when the fitting is connected to a printer and are designed for coupler caps with a diameter of up to 18mm, the coupler cap used in the picture is @PhilCaruso's Ultimate Coupler Cap.
I have added a curved filament guide in front of the sponge to keep the filament straight while going through the sponge as not doing so turned out to be an easily avoidable source of friction when the filament is under tension, which worked exceptionally well on the horizontal variant. The filament guide on the vertical variant was designed to be short enough to fit @luke's Hygrometer Holder Base on lid frames based on @GunplaMark's FS2025 Official Remix.
Both variants print fine in PETG without supports, I didn't even need a brim on a textured PEI plate.