Hive Filter with Stock Prusa 12034 Blower fan
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Hive internal filter for the Core One / Core One+, modified to run on the stock Prusa blower from the Advanced Filtratio
- Ocena
- 5 / 5
- Polubienia
- 31
- Pobrania
- 33
- Wydruki
- 1
- Wyświetlenia
- 826
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Open Community License v1
A modified version of MandicReally’s HIVE internal filter for the Prusa Core One / Core One+. Instead of the dual 40mm fans, this version uses the stock Prusa 12034 blower fan from the Advanced Filtration Unit.
Credit: This is a remix of the original HIVE - Core ONE Internal Carbon / Particulate Filter by MandicReally. Please check out the original for the full build details, assembly overview, and video, and give it a like.
What you need
Stock Prusa 12034 blower fan (from the Advanced Filtration Unit)
Flexible filament (TPU) for the seals
Quantities are the same as the original, minus anything that was for the dual fans. See the original HIVE page for counts. (Links above are MandicReally’s affiliate links.)
Which files to print
Housing: choose one
One piece: Filter Body (Skeleton) or Filter Body (Solid)
Split: Top Left, Top Right, Bottom Left, Bottom Right
Seals: print in TPU
Filter Gasket (FLEX)
Fan Gasket (FLEX)
Fan Seal (FLEX)
Printing
Printer: Prusa Core One / Core One+
Layer height: 0.15 mm, 0.4 mm nozzle
Housing material: PETG
Seals: TPU, Fiberlogy-style 40D or softer works best
Notes
Make sure the seals are printed in flexible filament. A leaky seal lets air bypass the filter.
Check that your printer’s chamber filtration setting matches your setup, as described on the original HIVE page.