OGX Mini Original Xbox Wireless BT Dongle
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A remix of a case I found online addressing a few issues I had with it.
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 40
- Wydruki
- 0
- Wyświetlenia
- 313
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Video Games
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a wireless OGX Mini dongle for the original xbox using Raspberry Pi Pico W.
Firmware can be found here https://github.com/wiredopposite/OGX-Mini
Get the original xbox port from aliexpress - they sell cheap breakaway cables or even xbox - microusb cables. Pry open the plastic with a knife, desolder the cables and use just the port internals.
Look for original xbox controller port pinout and solder the connection to the RPI Pico W accordingly. The 5V (VBUS) and GND can be soldered to the GPIO pins on the side of the Pico W and the Data- and Data+ can be soldered to the TP2 and TP3 pads on the bottom side of the Pico W. I used 24 AWG wire for the internal wiring. You can go thinner, this was the only wire I had laying around..
I found this site as a great reference for the Pico W pins and pads https://picow.pinout.xyz/
Use glue to secure everything together for a tight fit. I used an absolute overkill glue, Den Braven Mamut High Tack to make sure this will never be opened again.