OGX Mini Original Xbox Wireless BT Dongle
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A remix of a case I found online addressing a few issues I had with it.
- Rating
- 0 / 5
- Likes
- 7
- Downloads
- 40
- Makes
- 0
- Views
- 313
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Video Games
- License
- Creative Commons — Attribution — Noncommercial
This is a wireless OGX Mini dongle for the original xbox using Raspberry Pi Pico W.
Firmware can be found here https://github.com/wiredopposite/OGX-Mini
Get the original xbox port from aliexpress - they sell cheap breakaway cables or even xbox - microusb cables. Pry open the plastic with a knife, desolder the cables and use just the port internals.
Look for original xbox controller port pinout and solder the connection to the RPI Pico W accordingly. The 5V (VBUS) and GND can be soldered to the GPIO pins on the side of the Pico W and the Data- and Data+ can be soldered to the TP2 and TP3 pads on the bottom side of the Pico W. I used 24 AWG wire for the internal wiring. You can go thinner, this was the only wire I had laying around..
I found this site as a great reference for the Pico W pins and pads https://picow.pinout.xyz/
Use glue to secure everything together for a tight fit. I used an absolute overkill glue, Den Braven Mamut High Tack to make sure this will never be opened again.