Aoyue 888A Hot Air Rework Nozzle Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Stand for 5 hot air rework nozzles for the Aoyue 888A rework station. 21.5mm diameter ID
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 46
- Wydruki
- 0
- Wyświetlenia
- 107
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Share Alike
5-position hot air rework nozzle holder designed with the Aoyue 888A rework station in mind, although it may fit other models. The Aoyue rework stations are made by SRA Soldering Products with a 21.5mm inner diameter on the nozzles so any other rework heater with a similar nozzle ID will work just as well.
Print with almost any filament, settings, and infill as you desire as it is not a structural support for anything. I printed mine in PLA for easy printing. Once printed you can glue it down to the station or another surface nearby your bench.