1 / 4
Frostpunk - Round card Sleeve/Board and Marker (version française)
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Round card Sleeve/Board and Marker (version française) for the Frostpunk boardgame
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 15
- Wydruki
- 0
- Wyświetlenia
- 98
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Board Games
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This was made for the french edition. I don't know if it works for other languages edition.
Check in the photos for the schematic of the Phases position (relative to the bottom on the Round card) I used for this model.
Print Instructions
Sleeve/Board
Print the sleeve straight up. No support.
Add sufficient brim for stability. I used 10mm. Use PLA as PETG might be too soft/wobbly to print this thin make.
Marker
Add color change for the top 2 layers