1 / 4
Frostpunk - Round card Sleeve/Board and Marker (version française)
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Round card Sleeve/Board and Marker (version française) for the Frostpunk boardgame
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 15
- Makes
- 0
- Views
- 97
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Board Games
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This was made for the french edition. I don't know if it works for other languages edition.
Check in the photos for the schematic of the Phases position (relative to the bottom on the Round card) I used for this model.
Print Instructions
Sleeve/Board
Print the sleeve straight up. No support.
Add sufficient brim for stability. I used 10mm. Use PLA as PETG might be too soft/wobbly to print this thin make.
Marker
Add color change for the top 2 layers