1 / 1
Magnet for aluminum profiles groove 8 / Nut 8 — zdjęcie 1

Magnet for aluminum profiles groove 8 / Nut 8

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial

As i needed some magnets for closing my doors of my printer enclosure (build from alu-profile 30x30-Slot8) i designed some and inserted two 25x4x3 mm magnets.

The print needes to be paused at layer 19 and then you insert the magnets and let it finish.
PLA should be fine and fits perfect into Slot8 profiles.

Layerheigh:  0,2mm
Walls:  4
Support: No

Tagi