Eufymake Standard Bed Alignment Jig

This jig will allow you to perfect your positioning for zero point alignment on the Eufymake E1. Create two 100x1mm boxes in the Eufymake Studio software, one vertical and the other horizontal. Align them both where the bottom right corners are at 0,0 on the canvas. Place a couple strips of blue painter tape over where the alignment lines will print on your standard bed and print them onto the tape. Print this out and use four M3x8 screws to carefully align the edges with the edges of the printed lines on the tape. You should be able to precisely align the 0,0 corner with two of the screws and use the other two screws to line up the far ends of the printed boxes to give you a great alignment jig for your materials or jigs.