Liczymy pasujące modele…
Model description The Embraer E195-E2 is a narrow-body medium-range twin-engine jet airliner, that can carry up to 146 passengers, manufactured by Brazilian aerospace manufacturer Embraer. It is fitted with two underwing-mounted Pratt &…
Model description The Embraer 190 is a narrow-body short- to medium-range twin-engine jet airliner, that can carry up to 114 passengers, manufactured by Brazilian aerospace manufacturer Embraer. The Embraer 190 is fitted with two…
UPDATE: now the stand is printable too! Just print the part three times and glue together :) Also I added a shorter socket adapter that will make the moon fit better on the stand. The moon is scaled down to 86.87% to fit on Prusa MINI.…
This Magwell Flare fits Aero Precision M4E1 AR15 Lower with slip-on fit and retention features wrapped around rear. Fit is tight; if printer oversizes part then filing angled contact surfaces should be workable. The rear retention…
Star Wars E11 Blaster Rifle The BlasTech Industries E-11 blaster rifle , also referred to as the E-11 BlasTech Standard Imperial Sidearm , [3] the Stormtrooper Armament Blaster Rifle (BlasTech E-11) , [4] and the E-11 Military Issue…
Simple nut/ring for E14 lamp holder with standard M28x2 mm thread. NB! The model has a very snug fit. You may want to scale it up a few percent if you want it a bit loser.
I have lost this part for my lamp so I made one. Inner thread diameter is 28mm. Tested in PETG.
This is a modified foot for the Markellov Mushroom Lamp 2 . The upper Mushroom is based on the free lower poly version of the original Model. The higher poly version can be bought over the link in the original post and was used of the…
This is a mount for mounting a Reolink E1 (Pro) camera to the wall. The mount can be used up and down. The holes for mounting to the Reolink mounting bracket are 3mm, the ones for mounting the mount to the wall are 4mm. If you use 4mm…
Fourth set of Sonic figures based on Dr. Eggman and other Sonic villians. Set includes · Modern Eggman · Metal Sonic · Chaos · E102-Gamma (Still Painting, will update when done) · Infinite (Both with the blocks as a base and Infinite and…
I designed this stand for the awesome Moon Lamp from https://www.prusaprinters.org/de/social/17340-frank-deschner , because unfortunately I have not found a holder in this style. I have made the hole for the lamp exactly 26,70mm. I…
This is an alternative mini bed for the eufyMake E1 UV printer, designed to lower the bed height by 18.5mm. This allows you to print items up to 80mm tall directly on the bed, compared to the 60mm limit of the original mini bed. It…
I have several spare sockets, but unfortunately they are mostly without any rings that screw onto the socket. I have identified two types of threading that slightly differs. One has an outer diameter of 40.2 mm and a pitch of 2.4 mm. The…
I had E14 socket, but I didn’t have the mounting rings, so I modeled some
E-100 Tank Model 1:72 This model represents the German E-100 super-heavy tank with several build options: Tracks & Skirts No-skirts version : tracks are attached using 4 connectors . Full-skirts version : tracks already have built-in…
This decorative and functional light has been designed to be printed in one continuous spiral - fast, lightweight, material saving, functional and... beautiful? The model is prepared for an E14 220V lamp holder with a screw fix (+/- 3 cm…
Simple yet useful. I made in PETG Infill: 20% Layer Height: 0.2mm Supports: No If you like my work consider Buy me a coffee 😊
Second set of Sonic figures based on Team Dark. Set includes... · Shadow (may make a second version with a less intrusive support pole) · Rouge · E123-Omega, Replacement Minigun, Base, and Outer Base (STILL PAINTING WILL UPDATE PICTURES…
Originally published here: Samsung Galaxy Note10 n970 case by tato_713 - Thingiverse These cases were designed only for rigid materials, because the wide range curved borders prevent to make a good attach for the phone, and it will…
Scan of a Smallrig Sony ZVE10 Camera Cage for reengineering Important: The 3D Print Resolution Version is for this camera handle : https://www.printables.com/model/1134961-smallrig-camera-handle-with-hot-shoe-adapter
This is my interpretation in Gauge 1 (1:32) of the DE1 railcar designed by Allan (Rotterdam) for the “Nederlandse Spoorwegen” in ‘50’s. https://en.wikipedia.org/wiki/Blue_Angel_(train) https://nl.wikipedia.org/wiki/Blauwe_Engel These…
It is intended to replace a E10 Socket without the need for additional hardware or soldering. Two versions are available. One for surface mounting and one for hole mounting. If you need to make them fit for your particular use case,…
This is a model of the tank G98_Waffentrager_E100. maybe you ned to scale it up Print Settings Printer Brand: RepRap Printer: Prusa i3 Supports: Yes Resolution: 0.1 Infill: 30% Category: Vehicles
Nut Design for an Ikea e14 lamp socket. Step file included.
This is my E12 series resistors storage box. 96 drawers. Box size: 195x130x60mm. Drawer (inside): 13x13x58mm.
A Remix for Standby mode dock especially for iPhone 15 , 15Pro and more, Apple Watch (optional). You can choose 3 different models: A) without Watch, B) Watch positioned in centered height alligned to iPhone, C) or Watch positioned on…
I designed the fit to be perfect when printed in Prusament PETG, I haven't tried Prusament PLA or other filaments (yet). The battery type “LP-E17” is embossed on one side. On the other side the same is done in Braille.
Same case just not spread out in as many prints for those who have larger print beds. No supports should be needed. You only need 1 type of insert depending on the type of case you make. The hexagonal threaded inserts are for the resin…
Dieses Fahrrad im Maßstab 1:8 habe ich entworfen um erstens ein schönes Modell zu drucken und zweitens um einmal auszutesten wie fein und genau ich mit meinem Prusa Mini im nahezu Originalzustand drucken kann. Herausgekommen ist ein…
On my cults page you can download planes like this one on a larger scale and detail, they are for sale for 10 euros https://cults3d.com/es/usuarios/ivangonzalezm/creaci%C3%B3n Print Settings Printer Brand: ELEGOO Printer: ELEGOO Neptune 2…
Double-sided short curved rail compatible with BRIO and IKEA wooden rails. Printable without supports. Complete extended set contains: Straight Tracks Medium Straight Track - A Short Straight Track - A1 Mini Straight Track - A2 Mini…
Check the profile to download the full set. Subscribe to not miss out the next one!
firts one i printed with 0.4 nozzle and spiral mode, but is was very fragile. second attempt 0.6 nozzle this one came out nicly for the hole in the base switch off the: remove al holes, in the menu mesh fixes (if you wan a vase, don't do…
This is a remix of Owl Lamp (toolmoon). If you want to thank someone, only toolmoon (www.thingiverse.com/toolmoon/designs ; www.toolmoon.com/). I only remade sa2001a41.stl to E14 bulb. The lamp was upgraded from tBulb S to an E14 bulb.…
Fits perfectly on E14 sockets. Thanks to Frank Deschner for a great model! Print instructions Print with legs facing up.
This is a cover for canons LP-E17 batteries. It should fit batteries for EOS RP EOS M6 Mark II EOS 850D EOS 250D EOS 200D EOS M6 EOS M3 EOS 760D EOS M5 EOS 750D EOS 800D EOS 77D Please see also my GoPro 9 or 10 batterie cover .
This is a wall mount for the Reolink E1 Pro and E1 Zoom that uses a french cleat to mount it to the wall. The mount was designed for the camera to be mounted upside down. There were some mounts already on here but I felt like trying…
You can print this without using supports and using 20% fill. It provides the same stiffness as a purchased adaptor and should pop straight into the lamp shade once printed. Note : (nothing to do with the print). When fitting the light…
Funda para móviles personalizada de Iron Man. Esta funda sólo es compatible con iPhone 11 (no es compatible con el pro ni el pro max) Os dejo el step por si queréis modificarlo a vuestro gusto. Para más detalles del proceso e impresión…
Here is my design for Reolink E1 Wall mount. No supports required. Assembly: You will need 2 M3x6 screws to attach with the plate included with the camera to the main body. Cover plate is a snap in design. Wall mount via 2-4 screws.…
This is a custom-designed mini-bed for the EufyMake E1 UV Printer , allowing you to easily create printing jigs with minimal CAD skills. BE AWARE TO KEEP ITEMS AT LEAST 35MM FROM RIGHT EDGE AS THIS IS A NON-PRINTABLE AREA. On the…
Hifiman HE Stand for Arya, HE1000, and Jade series headphones. This model works best when the larger Dekoni pads are installed, as the original pads are slightly thinner.
Das Modell der Tram Typ E1 (Düwag-Gelenktriebwagen) der Wiener Linien habe ich als Standmodell für meine Spur N Modellbahn im Maßstab 1:160 konstruiert und 3D-gedruckt (ohne Beiwagen). Das Modell eignet sich ideal für Modellbahnanlagen,…
Before you buy alloy rig just check cheap version, for sure it is for you :P
Obs: This mount was primarily designed to be used with my tilt, both for desk and wall mounting, which can be found at this link: https://www.printables.com/model/1073632-reolink-e1-mount-magnet-wall-and-table-mount I have Reolink…
Would you like the shades to move up and down at a faster rate? I've created a parametric pulley specifically for the Aqara roller shade driver E1, and I've included STL files for pulleys with 6 to 18 teeth. The speed of the shades is…
This is a bat top replacement for the Arcade1up joystick with ball tops. Bat tops have a much better feel to me so I quickly made this to replace the ball top on my machine. Have installed these on three different machines without issue.…
Lamp plugs for E14 and E27 sockets.
This model was updated 29DEC2022. Please, DON'T print the previously released files !!! This is my interpretation of the NS Laes / DB Offs55 Autotransportwagen in Gauge1/1:32. Please take into account it's pretty large, measuring over 70…
Geetech PLA Matte Grau BambuLab X1C Mit Supports
Needed a small home for my XL6009E1 Step-up converter (DC-DC boost) PCB boards. Two parts (case + lid) to print. No support is needed. PCB and lid snap onto the case, no additional tools required. Here is a link to the XL6009E1 boards I…
The 3D printed mount is designed to perfectly fit the Ikea Tradfri motion sensor, ensuring a snug and secure fit. Whether you prefer a more permanent installation with screws or a flexible and removable option with magnet, this 3D printed…
This model can be used for integrating a E14 thread into a model. The depicted print was made with support, but should also be working without support.
If you place your Reolink E1 / E1 Pro / E1 Zoom Surveillance Cameras in a high position, you will not be able to see much of the room, especially if it is a small one. With this tilted base you will be able to make the camera frame more…
Was noticing some bugs were getting into my tank, modeled up this lid to help reduce the problem. Would be best to add a food safe coating to the outside of the print since water can come in contact.
This is an iphone12/iphone12 pro with Case mount for a Sprinter 2019+ (VS30). Inspired by another mount but redesigned from scratch to make it easier to print and remade for the iphone12/iphone12pro. Print instructions 15% infill, in PETG…
Put your soldering iron stand on top of the Weller WE1010 main unit to save some desk space. Hooks under the edge above the display, to maintain balance. Mounted using the rubber feet through the printed part into the soldering iron…
This is a replacement shade ring (nut) for standard E14 lamp sockets (M28 thread). I designed this to be a bit beefier than the original stock rings, which often crack over time. I also designed it with looser tolerances than many other…
Design Concept This is just a simple replacement nut for E14 lamp sockets. The lamp sockets are usually supplied with only one nut, although sometimes two are required for installation. With this file you can print another nut whenever…
Cover CLEAN DESIGN Use MULTI COLOR SYSTEM to print the APPLE logo IPHONE 15 IPHONE 15 PRO IPHONE 15 PRO MAX
a remix for iPhone 15 Pro Max inlcuding case with 168mm length and 83,3mm width. Optional with or without Apple Watch Dock. To fix the wireless charger for iPhone I used double-sided tape. To hide the hole for the wire, you can print the…
Lamp base for Moon Lithophane. Link to moon Lithophane: https://www.printables.com/model/23859-designer-lithophane-moon-
A simple case for LP-E12 batteries, used by the Canon EOS M50 for example. It can hold 4 batteries which should fit snugly. You can see a timelapse of my print here: https://youtu.be/Xd44k17qnrE
Print 2x of Inner and Outer pieces. T11_sup_Inner.stl and T11_sup_Outer.stl have custom supports already included. use T11_Inner.stl and T11_Outer.stl if you want to generate your own supports. Thin walls or Arachne is required for the…
My version of the standard Brio compatible "E1" curved track Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: No Resolution: Any Infill: Any Filament: Any Any Any Category: Construction Toys
The wireless chargers on many new vehicles don't work for sh!t unless the coils are aligned properly. The 2023+ 3rd gen GMC Canyon/Chevy Colorado chargers are no exception. This is a custom spacer I drew up to fit in the tray and center…
🟩 🟦 🟦 🟪 🟥 🟧 🟨 This is a basic alignment tool for ensuring your designs are straight on the eufyMake E1 UV printer. It fits snugly over the mini flatbed and features a handle over half of the tool for easy placement and viewing. Most…
A desiccant box to hold silica gel beads (Dry&Dry) for the Chitu FilaPartner E1 The model is for the back-left/front-right corners. For the other two, mirror the print. Printing: Prusament PC Blend, Standard Profile, 0.4 Nozzle, 0.2…
housing for a step down converter Link Amazon can be printed in PET (preferred) or PLA includes 2 cavities for zip ties to secure your cables inludes a version with “printhelpers” to improve adhesion to the bed and can be cutted off…
Do you like JDM style car modification? If so, you might have noticed that those modified JDM car's wheels are often decorated by its unique long and colorful wheel nuts. However, if you drive an European car, it might be difficult to…
I love my little blower for getting rid of sawdust from the garage, but the inlet is on the left side and is always getting stuck on my shirt. I'm sure that I am losing a little efficiency with this, but it still works for my needs. Print…
this adapter is used to reduce the size of attachment for lampshades and make sure that a lampshade with a large attachment can be mounted on a lumen with a small attachment Category: Parts
Remix of my Openframe1 case with parts that can be glued together. I use ABS for my prints and I think acetone gluing is neat. There are chamfers and slots so that everything can fit together nicely. I then used some m3 heated inserts [1]…
About the Canon LPE17 Batteries Holder: This is a simple Gridfinity bins collection adjusted to fit very precisely the Canon cameras batteries LPE17. Variations: 1x1 (2 batteries) 1x2 (4 batteries) 1x3 (6 batteries) 1x4 ( 9 batteries)…
These are my two mounts for the Fanttik E1 Max electric screwdriver. In the pressure profiles you will find one pressure profile each for A1 Mini and the rest of the Bambu range for wall mounting or for a Skadis pegboard. For wall…
iPhone 12 and 12 pro case with a hexagonal tile pattern. This case protects the screen as well as the camera lenses
Added own creation of a boba fett head.
I needed a model of the DE10 Nano for a future project. No one had posted one yet so here you go. This is not meant to be printed but used for creating cases and the like. Category: Gadgets
This will help you organize all the fixtures that come with the Ultim8 JIG on Kickstarter. You will probably want to print at least 2 of the organizer trays (one for the 5mm tall fixtures and another for the 2.4mm tall ones.) The…
These little plugs close the two small holes on top of the rear side of the Chitu systems Filapartner E1. There are four more rectangular holes on the bottom. I added a plug for them, too. Update 2025_10_03: Released revision V2 that fits…
only for led bulb seulement pour lampe led for E14 bulb Mes autres lampes: Print Settings Printer Brand: Creality Printer: CR-10S Supports: No Resolution: 0,25 Filament: ICE PLA Category: Decor
This is my Sony ZVE10 Camera Dummy Scan. Have fun and build nice things for your ZVE10.
Printed using ESun PLA+ Grey and Black Most parts needs supports (Both Tree and Standard) Super glue is required as well Raw un-melted filament for the gun movement Did some experimentations regarding the tracks and integration of…
Easy print E-100 Scale 1/100 (Required some glue and sanding) The Panzerkampfwagen E-100 (Gerät 383) (TG-01) was a German super-heavy tank design developed towards the end of World War II . It was the largest of the Entwicklung series of…
See the youtube video for details. The extruder requires three or six MF85ZZ flanged bearings and three or six countersunk M3 screws. The flanges on the bearings need to be ground to 9.1mm diameter edges. Alternatively, pick your own…
The Ikea Tokabo lamp is a great match for the Hue smart bulbs (especially the colour bulbs) as they produce nice diffuse light. However, the Hue E14 bulb that fits in the socket for these lamps is too long. This adaptor holds the original…
Reolink E1 Pro - camera tilt mount Hi, take a look at my new version of this type of adapter, which I consider much superior: https://www.printables.com/model/1073632-reolink-e1-mount-magnet-wall-and-table-mount…
Travel box to protect the Sony ZV-E10 with 16-50mm Kit Lens. Camera will fit snugly and can be secured with a rubber band. Useful when you need to pack the camera for travel and don't want to sacrifice space with packing foam. Printed in…
2.5" Drive HDD / SSD Laptop Drive Caddy Disk Tray Bracket for Lenovo ThinkPad. Compatible Models: For Thinkpad T470 T480 T570, For Thinkpad P50 P51 P51S, For Thinkpad P70 P71 P72, For Thinkpad E460(NOT E470)， For Thinkpad E480 E485 R480,…
A base for a Lithophane Lamp for Bulb socket with a thread. In future i will be going to make a E14 thread socket
socket e14 to use in your projects where to transform a bust into a lamp for example
Printed using ESun PLA+ Grey and Black Most parts needs supports (Both Tree and Standard) Super glue is required as well Raw un-melted filament for the gun movement Did some experimentations regarding the tracks and integration of…
Ich habe meinen eigenen Red Dot Mount für die Novritsch SSE18 auf Grundlage des Novritsch Originals entworfen, da dieses derzeit (07.10.21) im Novritsch Webstore nicht lieferbar ist: https://eu.novritsch.com/product/sse18-red-dot-plate/…
Used tinkercad and added mounting holes for the IKEA Skadis Board. Now I can hang my brother P-Touch E1110 Label Writer to the Skadis Board. It's not the best design- but it works! :) This is a remix of the Mr_Dan-File. -- GERMAN Habe die…
Note: Only one support is needed at the bottom where the power plug connects. I have no clue what that little cutout left of it is for, or if we really need it. It was there on the hull you receive when you buy one, so I did the same…^^"…
This is a 10cm tall stand for a Reolink E1 Zoom camera. The cable can be fed in through the hole in the back and fed out through one of the holes in the foot of the stand. Can be printed without support.
A general purpose 3 leg stand for an e14 socket. Can be used for a lamp shade or lamp base for multiple-shades. Screw on cap to hide socket and cabling. No supports required. The fassung-lamp socket ( e14-28 mm):…
Sherman tank track type: T54E1 !!!!!!!!!! like and follow !!!!!!!!!!!!!
