Megaboom 3 Protection Holster
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Do you like this design and want to give a Tip for it? Do it here About this: Protection Holster was tested. Works…
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 10
- Wydruki
- 0
- Wyświetlenia
- 217
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Audio
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Do you like this design and want to give a Tip for it? Do it here
About this:
Protection Holster was tested. Works fine and sounds great. Should be fine for Boom 3 too, if printed smaller.
STP-Project-File is still a bit messy, so I didn't upload it yet.
The Holster was printed with Semiflex TPU. Handle with PETG.
Materials/Slicing:
Fiberlogy Fiberflex 40D was used for the holster. Seems to be the best price/performance Semiflex-TPU in 2020. 20%-Gyroid-Infill worked fine for me. The Handle was printed in PETG.
You must use the smart seam-hiding-feature in your slicer. Random Seams leads to roughness, which may damage your fabric.
Afterwards/Mounting the handle:
I did use M5x15 countersunk-screws for mounting the handle. I did cut M5-Threads into the handle. Afterwards I did screw the screws in a little to wide to turn them a little back, so the heads sit tight in the tpu and a minimal gap between holster and handle is existant. The M5-Thread will work as a friction bearing.
Print Settings
Printer:
TwoTrees Sapphire Plus with E3D Hemera
Rafts:
No
Supports:
No
Resolution:
0.2
Infill:
20%
Filament:
Fiberlogy FiberFlex 40D
Burgundy
Notes:
Use Smart-Seam hiding!
Category: Audio