Meteo cover base for window apron
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Updated base and sensor mount, so the cover can be glued (with double sided tape) to the window apron.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 7
- Wydruki
- 0
- Wyświetlenia
- 94
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
New meteo cover bottom, so it can be glued to the apron. The base has 3° tilt to compensate average apron incline. The gap for wires is created in to variant: east-facing and west facing windows, so it leads toward the corner (as you can see in the photo).
The sensor mount is better to be super glued to the base. The hole spacing was designed for SH4x (and similar) by LaskaKit
The free standing sensor on the pole in the middle of garden will be always better, but this works good enough, if have the garden option...