1 / 1
Nema 17 Linear Actuator
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a simple Nema 17 stepper motor driven linear actuator.
- Ocena
- 0 / 5
- Polubienia
- 45
- Pobrania
- 160
- Wydruki
- 0
- Wyświetlenia
- 3155
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Public Domain
SzczegółyPliki (7)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (49)Powiązane
This is a simple Nema 17 stepper motor driven linear actuator. Not very powerful but I thought I would share it anyway in hopes to get input from the community to improve it. I'm working on a new version that uses a worm gear to improve torque and maybe a DC motor driven version with a gearbox. It uses a 6mmx13mmx5mm bearing in the Lower Bracket and a 1/4x20 hex nut in the inner sleeve. You can set an M601 code in your gcode around 10mm to pause and insert the nut/bearing. I used ¼" x 20 threaded rod to drive the inner sleeve.