Cauldron for Whirling Witchcraft
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Spice up your potion brewing in Whirling Witchcraft with some 3D printed cauldrons.
- Ocena
- 5 / 5
- Polubienia
- 218
- Pobrania
- 1563
- Wydruki
- 8
- Wyświetlenia
- 5751
- Oceny
- 8
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Board Games
- Licencja
- Creative Commons — Attribution — Noncommercial
I was going to print this awesome Cauldron for Whirling Witchcraft by user DrK on Printables.
I liked the cauldron design, but the model needed supports in some places, and I wasn't sure I would like the result. So I decided to make my own.
Big thanks to DrK for making the original model. Mine is pretty much based on theirs, but remodeled from scratch and intended to be printed without any support.
I made the base of the cauldron go all the way down to ground level, so the feet and the bottom of the cauldron touches the ground for a stable base, and I have fairly steep angles, so it should print without any problems. The handles are also at good angles, so they don't have much overhang and they print without support.
For the resource tokens, I printed these ones from canadiankorean over at Thingiverse.